Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Laserglow Hydra is actually NOT <5mw

Razako

Razako

0
Joined
Mar 17, 2006
Messages
4,301
Points
113
While messing around the other day, I noticed something quite interesting about the laserglow Hydra. The front cap unscrews, and it contains what appears to be a 'black glass filter'. Once removed, the laser output appears to be well into the 30+mw range. It will actually sting your skin if held in one place for a while.

Laserglow actually has a pretty ingenious method for getting around customs restrictions. Just place a removable filter in the tip of the laser which limits the output to the allowed amount.
 





How cool, you have to be excited but your sure hiding it well:)
 
Last edited by a moderator:
Cool, I have thought that would be a way to sell higher power units as 5mw or lower output lasers which could easily be later modded to higher output too, but I bet they did not design it to get around regulations, instead because they can't get low power laser diodes for that wavelength and this was a way to bring the power down to meet regs. The thought occurs to me that they could just adjust the current down to reduce the output, but at that low of an output power, for that diode, probably problematic to do so, perhaps unstable at that low of an output, or won't do it.
 
Last edited:
Have you noticed a color or beam and dot spec difference?
 
Last edited by a moderator:
GSS said:
Have you noticed a color or beam and dot spec difference?
Click to expand...
No notable color or dot difference. The filter was merely to attenuate the beam to <5mw. I mostly found this interesting because it's a great way to get around customs restrictions.
 
Last edited:
Curious to know if their other units have the same filter? Great find though.
 
Razako said:
While messing around the other day, I noticed something quite interesting about the laserglow Hydra. The front cap unscrews, and it contains what appears to be a 'black glass filter'. Once removed, the laser output appears to be well into the 30+mw range. It will actually sting your skin if held in one place for a while.

Laserglow actually has a pretty ingenious method for getting around customs restrictions. Just place a removable filter in the tip of the laser which limits the output to the allowed amount.
Click to expand...
I believe that is a neutral density filter from your description.
 
You must log in or register to reply here.


Back
Top