Kenom
0
- Joined
 - May 4, 2007
 
- Messages
 - 5,628
 
- Points
 - 63
 
well, as I indicated the meter is not horribly accurate but 10-20mw depending on the laser isn't bad. Most I've tested is a 200wm laser and it was off by 10mw as well. so this isn't a bad little kit I personally would like to see these units come with the backlight enabled. All I did to get it working was just wire on some jumpers. Here is a picture of what it looks like with the backlight on.
		
		
	
	
		
	
				
			
	
	
