Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

LASER LENNY VER 1.0 - RGB Projector


Flaminpyro

Well-known member
Joined
May 4, 2009
Messages
5,462
Likes
551
Points
113
Very Very Cool Lenny You have done a fine job, something to be proud of for sure :D

That looks like a kick ass projector you have created it sure puts out some fine beamage :drool: +2 !!!
Come on your not getting away that easy, PICTURES of the beast !
 
Last edited:

noesc

New member
Joined
Aug 2, 2009
Messages
73
Likes
14
Points
0
Actually that was all mounted on invidiual appropriate heatsinks then screwed into a 2ft by 2ft 1inch thick plywood.


It is now in pieces while I attempt to use another 1inch thick 20 x 20 inch aluminum plate I scored from work.. it has some threaded holes already so Im trying to fit things to those.. its a bit ugly atm
 

Things

New member
Joined
May 1, 2007
Messages
7,549
Likes
349
Points
0
What are the powers you're using? Red looks a little lacking, but nice work ;)

Although, a 1 inch thick baseplate is kind of overkill IMO. Nothing wrong with using it though, if you don't mind the weight. I can stand on my 6mm baseplate and it ain't going anywhere :)

Cheers,
Dan
 

noesc

New member
Joined
Aug 2, 2009
Messages
73
Likes
14
Points
0
I love my job... Took a stroll by the dumpster on Saturday night and found a 4ft wide 6ft long 1 inch think custom aluminum honeycomb board that had been damaged in the right corner by the binding strap.

I now have a bunch of 24x36x1 inch think ultra light panels.... Time to get working on a new design..
 

CDHDC

New member
Joined
Dec 3, 2009
Messages
248
Likes
11
Points
0
Very nice! I can't wait to see some pics after it's all mounted up on your new plate;) +1:gj:
 

ped

Well-known member
Joined
Nov 25, 2008
Messages
5,003
Likes
710
Points
113
Flylife = Quality tune.


projector aint bad either.
 

hakzaw1

Well-known member
Joined
Apr 2, 2009
Messages
9,355
Likes
1,430
Points
113
I love my job... Took a stroll by the dumpster on Saturday night and found a 4ft wide 6ft long 1 inch think custom aluminum honeycomb board that had been damaged in the right corner by the binding strap.

I now have a bunch of 24x36x1 inch think ultra light panels.... Time to get working on a new design..

GOOD Find!! If you have any extra pieces bring me one to Newton.
seeya there-

'the other Lenny"

PS I have room in my car going to SELEM V from S Central Texas--for one(maybe two) more rider with room for gear PM asap.
 




Top