Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Kryton Logo competition

Joined
Jul 22, 2008
Messages
11
Points
0
Here's mine so far. Hope it works so you can see it, if not I'll try again another way.
 

Attachments

  • Sample.jpg
    Sample.jpg
    24.7 KB · Views: 124





Joined
May 2, 2008
Messages
475
Points
0
el-taco said:
IMO it looks to detailed to be put on the side of a laser.

Maybe. One with larger crystals:
 

Attachments

  • Kryton_logo_6_gray.png
    Kryton_logo_6_gray.png
    49.5 KB · Views: 101
Joined
Mar 14, 2008
Messages
1,402
Points
0
Aight Kenom, personally I think it's going to be difficult to pull off a logo made of ice crystals that doesn't look tacky on the side of a kryton (remember these things are going to be scaled down A LOT) So I made these very simple bits of text just as an example. The brushed metal effect can be changed, as well as the grey glow.

1.png

2.png

3.png

4.png

5.png

6.png

7.png

8.png

9.png

10.png


I just like a 'clean' look, is all. Are there any of these that look like the sort of thing you want? I have lots of different ones...

Edit: My bad, that last one isn't supposed to have any glow. Looks crap, I know. Fixed. Old school. =D
 
Joined
Jul 22, 2008
Messages
11
Points
0
V.I. - The "missing" N on mine was PURPOSELY left out as it is not finished yet - which I had stated above "Here's mine so far". I will most likely post it again when it is finished.
 
Joined
Mar 14, 2008
Messages
1,402
Points
0
Okay, cool. By the way if you're going for the snowflake 'bloom' thing use straight lines instead of freehand. If you could make a cool looking handwriting-style Kryton logo it'd be fine, but personally I can't make freehand text for stuff and it always comes out like a 5-year-old's handwriting. >.<
 

lam3

0
Joined
Mar 30, 2008
Messages
58
Points
0
VillageIdiot said:
Aight Kenom, personally I think it's going to be difficult to pull off a logo made of ice crystals that doesn't look tacky on the side of a kryton (remember these things are going to be scaled down A LOT) So I made these very simple bits of text just as an example. The brushed metal effect can be changed, as well as the grey glow.

1.png

2.png

3.png

4.png

5.png

6.png

7.png

8.png

9.png

10.png


I just like a 'clean' look, is all. Are there any of these that look like the sort of thing you want? I have lots of different ones...

Edit: My bad, that last one isn't supposed to have any glow. Looks crap, I know. Fixed. Old school. =D

These look cool and clean, which is what I think would be best. Detail on a small scale won't work, you'll have white pieces of crystal in the KRYTON which will make it look like a piece was skipped during engraving, etc.

Something that could be done is an edge of crystalloids (lol) around a clean depiction of 'KRYTON', though it may ruin the straightforwardness of clean letters.
 
Joined
Jul 22, 2008
Messages
11
Points
0
If you must know I was freehanding with a **** trackball mouse with a baby on my lap in photoshop 7.0 (with a baby on my lap I might add) - so actually I don't think I did too bad. And as I said before - I am not done with it yet....but what you see is about 3 hours worth now, from scratch.
 
Joined
Jul 22, 2008
Messages
11
Points
0
And BTW, kenom was also looking for a logo in which to use on the website as well. He neglected to put that detail on here (the boys have a tendancy to make him forgetful), so that's something else you may wish to keep in mind.
 

lam3

0
Joined
Mar 30, 2008
Messages
58
Points
0
Just an ugly sketch, but this is what I think would look cleanest. I know it's not really what was asked, but oh well :/.

Also, I am not good at Photoshop, so this is meant just as a visualising aid. The edges of the border should be parallel everywhere.

KRYTONsketch.png
 
Joined
Mar 14, 2008
Messages
1,402
Points
0
^I like it, actually. It looks like the Nintendo logo =D

I can also do the 'rather odd' style. Here's something, maybe 5 minutes in Flash MX with the grid on...? Needs some work, the N doesn't look right and stuff.
 

Attachments

  • barely_readable.png
    barely_readable.png
    4.5 KB · Views: 71

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
I liked VIs ones, did you do that with PS ( I sound nooby, but I havent used it in years ) need to get that off my dad again >.<
 
Joined
Mar 14, 2008
Messages
1,402
Points
0
No, I'm a cheapass who doesn't have PS. I have Paint.net, a pirated version of Flash MX and that's about it.
 
Joined
Jun 12, 2008
Messages
1,199
Points
48
Here is one I put together a couple of minutes ago.


brtaman
 

Attachments

  • Kryton4.png
    Kryton4.png
    100.1 KB · Views: 84

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
I only have paint ;D, but I can get flash and PS , and they be not pirated. Yarr ye olde cheapskate !
 
Joined
Mar 14, 2008
Messages
1,402
Points
0
brtaman said:
Here is one I put together a couple of minutes ago.


brtaman

Looks badass, but lots of the badassness (badassity?) will be lost when Kenom converts it to greyscale D:
 




Top