Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



K301V 125W CW Nd:YAG pumping chamber for sale

Laserbuilder

Active member
Joined
Dec 4, 2016
Messages
179
Points
43
Hello!

I would like to offer this K301V YAG pumping chamber for sale. It has a 6.3*100 mm YAG rod and a DNP-6/90 CW crypton arc lamp, with the dimensions of the arc part 6*90 mm correspondantly. Maximum power output can be 125W on 1064 nm or 30W on 1.32 um, the lamp draws about 4-4.5 kW max.

I would like to sell it for 900$.

I think this is a reasonable price because at eBay high power YAG lasers are quite rare and cost much more.

I've got a middle man with a PayPal account who can help the deal to be secure, but sometimes it is hard to contact him.

If you don't like the price -- I'm open for offers and trading.

I can send it anywhere by regular mail, I've got rich experience sending parcels to USA.

See the photos.
 

Attachments

Last edited:



Laserbuilder

Active member
Joined
Dec 4, 2016
Messages
179
Points
43
Feel free to offer your price and to trade. It can be decreased significantly in the process of negotiation.
 

CurtisOliver

Well-known member
LPF Site Supporter
Joined
Jun 12, 2015
Messages
6,532
Points
113
Not a bad price Laserbuilder. I can't afford it myself, but best of luck! :beer: :anyone:
 

CurtisOliver

Well-known member
LPF Site Supporter
Joined
Jun 12, 2015
Messages
6,532
Points
113
Imagine the 589/532 you could generate with that. As it lases at 1319 and 1064. :p
 

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
11,214
Points
113
Yep, just need the right optics.
 

CurtisOliver

Well-known member
LPF Site Supporter
Joined
Jun 12, 2015
Messages
6,532
Points
113
Yes, that's the hard bit when it comes to 589.
 

CurtisOliver

Well-known member
LPF Site Supporter
Joined
Jun 12, 2015
Messages
6,532
Points
113
Laserbuilder, don't fall into the trap of further lowering your price. The problem is, it is an expensive item anyway and not many have the money lying around. It is also specialist, not many people have the experience or the need for a 125W YAG. I know I sure would want it, but I wouldn't be able to use it or afford it. I don't want you to rip yourself off. Too easily done, when no-one is biting. ;) Good luck with your sale. :beer:
 
Last edited:

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
11,214
Points
113
Yep, you can lower your price until it is far less than what it is worth and only then, might get an offer. Most members here aren't going to buy something like that. Better to wait it out on ebay. That goes for anyone selling here, I've seen it over and over again, a member will drop the price far too low before anyone will buy it in this group. We are worse than a bunch of amateur radio operators, only want to pay a penny on a dollar!
 

Laserbuilder

Active member
Joined
Dec 4, 2016
Messages
179
Points
43
I'd like to add for sale one more Nd:YAG pumping chamber.

This is a K-107 pulsed pumping chamber from a laser welding machine. It has a 6.3*100 mm YAG rod with higher Nd dopant concetntration than in a CW rod in K-301. The datesheet claims that it can give output of 4 Joules from 200J pumped in. The flashlamp is rated for 800J, so the output can be increased in 4 times! If it is used at very low pulse repetition frequency (like 1 pulse per 2 minutes) active water cooling is not needed -- it is enouph to fill the chamber with cold water. When it gets warm -- simply change it.

The maximum PRR can be up to 12.5 Hz with 200J pumped.

As for the price. I had a russian customer for it but he called off the deal in the last moment. I want it to go away fast, so I ask only 400$

I will send it anywhere by post. Make your offers. See the photos.
 

Attachments

Last edited:

CurtisOliver

Well-known member
LPF Site Supporter
Joined
Jun 12, 2015
Messages
6,532
Points
113
Alaskan? :p I know I shouldn't keep tempting you. :eg:

Very good price Laserbuilder, good luck with your sale.
 
Last edited:

Laserbuilder

Active member
Joined
Dec 4, 2016
Messages
179
Points
43
I also have for sale the following laser parts:

1) 6.3*100 mm separate Nd:YAG rod for the K-107 pumping chamber. My price is 150$ for it.

2) 10*260 mm separate Nd:Glass rod. I'll let it go for 100$.

3) Really BIG ZnSe lens for multi-kW industrial CO2 laser. 2" diameter, 7.5" focus length. Used condition. 75$.

If anyone wants everything from this post in the same time -- I'll make a discount. See the photos.
 

Attachments

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
15,355
Points
113
I think someone might jump on that zinc selenide lens as there has been some talk about CO2 laser lately. Not a bad price for such a large lens that can be moved as it becomes damaged and have a longer life.
 

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
11,214
Points
113
Interesting, I'm not able to get online much where I am at right now, but I love YAG lasers now, will take a closer look.
 

CurtisOliver

Well-known member
LPF Site Supporter
Joined
Jun 12, 2015
Messages
6,532
Points
113
I know you love YAG's Alaskan. :p
I have noticed that you have been online less lately.
 




Top