loreadarkshade
Active member
- Joined
- Dec 14, 2020
- Messages
- 158
- Points
- 28
You can see all available models @ Jlasers.org
I am the owner. I build each one by hand out of chinese flashlight hosts. I designed all my drivers with JLCPCB. They are all constant current drivers.
Most use acrylic lens to keep prices down. (They perform surprisingly well!) Just gotta keep it clean to prevent melting and avoid burning at close range.
I lathe brass bushings for the diode to press in on my old Atlas lathe.
I have been doing this for a few years now and have had time to finish and refine my designs.
They all use the same host body. Here are some specs:
The host measures 10 x 2 x 2 cm
It weighs 100g without battery, 115g with battery.
They all use a 14500 3.7v button top.
Here is a quick list of models:
405nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/405nm-1000mw)
$80 + Shipping Worldwide
700mW
GH04W10A2GC Diode
450nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/450nm-1600mw)
$60 + Shipping Worldwide
1600mW
PLTB450B or M140 / A140 Diode
455nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/455nm-3500mw)
$90 + Shipping Worldwide
3500mW
NUBM08 Diode
488nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/488nm-55mw)
$70 + Shipping Worldwide
55mW
GH04850B2G Diode
505nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/505nm-35mw)
$70 + Shipping Worldwide
35mW
GH05035A2G Diode
520nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/520nm-700mw)
$90 + Shipping Worldwide
700mW
GH05C01A9G Diode
638nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/638nm-700mw)
$60 + Shipping Worldwide
700mW
HL63613MG Diode


I am the owner. I build each one by hand out of chinese flashlight hosts. I designed all my drivers with JLCPCB. They are all constant current drivers.
Most use acrylic lens to keep prices down. (They perform surprisingly well!) Just gotta keep it clean to prevent melting and avoid burning at close range.
I lathe brass bushings for the diode to press in on my old Atlas lathe.
I have been doing this for a few years now and have had time to finish and refine my designs.
They all use the same host body. Here are some specs:
The host measures 10 x 2 x 2 cm
It weighs 100g without battery, 115g with battery.
They all use a 14500 3.7v button top.
Here is a quick list of models:
405nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/405nm-1000mw)
$80 + Shipping Worldwide
700mW
GH04W10A2GC Diode
450nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/450nm-1600mw)
$60 + Shipping Worldwide
1600mW
PLTB450B or M140 / A140 Diode
455nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/455nm-3500mw)
$90 + Shipping Worldwide
3500mW
NUBM08 Diode
488nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/488nm-55mw)
$70 + Shipping Worldwide
55mW
GH04850B2G Diode
505nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/505nm-35mw)
$70 + Shipping Worldwide
35mW
GH05035A2G Diode
520nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/520nm-700mw)
$90 + Shipping Worldwide
700mW
GH05C01A9G Diode
638nm: (https://sites.google.com/view/ye-olde-laser-shoppe/lasers/638nm-700mw)
$60 + Shipping Worldwide
700mW
HL63613MG Diode


Last edited: