Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

jayrob Build Kits, Lenses, and Other Stuff Listed Here!

Lots of possibilities...

First read up on proper eye protection in case you have not already done so...

Sending e-mail...
 





great!

Ive been so long looking for a great community. I can't wait to find new friends.
 
ealberto said:
u have the beefiest hand i have ever seen
Click to expand...

All the better to slap you around with... :crackup:

Just kidding. :)

That's what I tell my wife though... But of course she knows I'm just kidding...
 
Last edited:
Yeah it's confusing enough, but when the vendor gets it wrong, it's even more confusing. The host you linked is chrome coated brass...

I got word tonight from another vendor that tells me that my SS 10440 host is available. Time will tell if they are telling me truthfully or not.

This was also told to me on my last order that got canceled because of not being able to get the hosts.
 
There's no end to the different lights that can be modified into awesome lasers! :)

I'd stay away from titanium material though!

Really hard to work with...
 
I LOVE YOUR STAINLESS HOSTS - I would like to order a few - give me a call 718 673 3075

Dave
 
Just contact me through the private messaging system here at LPF... :)
 
I've had some on order for a couple of months...

They are back ordered...
 
I placed my order guys! Ill post next year after I have it built and take a video :) Prob going to take jayrob's advice and go with the 100mw module on a DIY green build.
 
I try to avoid selling the same host as other sellers out of common courtesy...

FP and I both offer the Stainless steel host that fits an 18650, but we talked about it ahead of time, and agreed that our designs are different...
 
That does look good! Looks almost just like my SolarForce kit!
http://laserpointerforums.com/f64/fs-solarforce-l2p-kit-18650-host-massive-heatsink-53746.html

L2P%2019.jpg
 
Last edited:
I swear if these was already built laser's I would totally buy from a website you own.
 
Keep in mind that the power will drop as the battery drains in that set up. Because it is not a driver. Just a resistor...

The output would be more like 235mW's with an AixiZ acrylic lens. It is 286mW's (at full charge) only using my 650-G-1 glass lens...

Quite honestly, I just experimented with the 2 ohm 1 Watt resistors that I had on hand. And since I liked the result, and the resistors are small as well, I went with it!

I have some of the 2 ohm 1 Watt resistors, so I would include one with a Tiny Titanium kit, but not the silicon diode and cap...

I don't stock the host, but I'm sure I can order it from lighthound. If you decide to order, just send me a PM... :)
 
You must log in or register to reply here.


Back
Top