"I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm PHR-803T

lazerboy123 · Dec 29, 2009

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

ok just wanted to make sure i already order the batteries last night the 14500 batteries and a charger so in a sence an estimate time of ove 1 hour is prety good now that i think of it and i bought 2 batteries so if one dies i can throw it in the charger and put the fully charged one in....

thanks for the help guys!!!!!!

AG.........

lazerboy123 · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Hey everyone i just want to thank everyone that helped me on this i just finished my first build with the PHR-803T diode i am waiting for a host to com in the mail to put it in... because right now its just the inner parts and very fragile,ive tried lighting matches and plastic and it lights a match farly fast and burns plastic almost instent..... iam so happy now that this is some what complete i feel like iam hooked:crackup:

I will post some pics as soon as i get the host in and i complete all of it....

so thank you to all that helped me......

PEACE, Angelos G.................

Deleted member 8382 · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Welcome to the "I didn't burn my first diode" club, we are not so many in here :crackup:

However don't think it's all safe now, we all have burned lots of diodes, and you don't want this to happen with the 12x xD

lazerboy123 · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

thanks - Hallucynogenyc yes i agree its not all safe now iam am very carefull also i have orderd another PHR-803T sled to have when and if this first build diode "FRIES":crackup: But even though i know i have another PHR-803T sled on tghe way i am still going to be very carefull with this one...because even though its cheap it is still money you know......

Also here is a list of everything that ive order also

i have recieved some of the things already

):

-Dummy load
-Soldering iron "because the one i have is not that good"
-Multimeter
-Solder 60/40 .032
-Flex
-PHR-803T sled
-Safety glasses "that iam going to custom make for blu ray protection"
-4 Trustfire 14500 batteries
-Trustfire battery charger
-2 Extra Aixiz moudel with focusing lens "acrylic" For the PHR-803T BUILDS
-Glow in the dark silicone Tailcap / Dustcap
-UltraFire C3 Cree with belt clip holder case "the black one not the stainless steel"
-Flexdrive v5
-Vice
-Some new hand tools
-JayRob host build heres whats i got ::: UltraFire C3 Stainless Steel host,custom heatsink,405-G-1 Lens with Aixiz focusing module,Flexdrive v5 preset to 300mA

So this is pretty much everything i have order this week i want to also order a standard LaserBee I meter but cant offered it right now but i will as soon as i get some money.....

So thanks to all

peace,
Angelos G.........................

Deleted member 8382 · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

I wish I had money to spend like you do :S

Asherz · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

lazerboy123 said:
-Safety glasses "that iam going to custom make for blu ray protection"

If by that statement you mean you are going to attempt to build your own safety goggles,

*DON'T*

Your eye sight is worth more than $25, don't skimp on safety and opt for a cheaper alternative.

If that's not what your implying I apologize, here are some goggles I would recommend and have been great for me, block violet all the way up-to green:

Laser Glasses - UV to Green Lasers Protection 190-548nm :: Laser Safety :: Dragon Lasers

GL with your build.

lazerboy123 · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Asherz said:
If by that statement you mean you are going to attempt to build your own safety goggles,

*DON'T*

Your eye sight is worth more than $25, don't skimp on safety and opt for a cheaper alternative.

If that's not what your implying I apologize, here are some goggles I would recommend and have been great for me, block violet all the way up-to green:

Laser Glasses - UV to Green Lasers Protection 190-548nm :: Laser Safety :: Dragon Lasers

GL with your build.

wow i was going to build my own because the ones that i was finding were for like $50 dollars but now that you should me these there about the same price i would have paid to built my own.....when i get the clear glass in from home depot iam going to return them at the store and not even bothe going to get the red film from a local dj place iam going to get these thanks alot.......

lazerboy123 · Jan 7, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Hallucynogenyc said:
I wish I had money to spend like you do :S

think of it as a one time deal....
YOU KNOW WHEN YOU GET INTO SOMTHING MONEY DOSNT MATTER:crackup:

BUT IF YOU LOOK AT IT THIS WAY I WOULD RATHER HAVE ALL YOUR LASERS. HAHA

I just had some money put aside for the year,every pay check i put some money a side and at the end of the year iam suprised on how much ive put aside....because i figured if i keeped it with me i would spend it on stupid stuff...you know???

BUT THIS IS ALL WORTH IT!!!!!

If you count up all the money you spent on your lasers this is a fraction on what you spent on those nice laser:yh:

lazerboy123 · Jan 8, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm PHR-803T

hey guys heres a video of my first laser build what i did was is i took the host build that JayRob did for me and removed the pill that he install my flexdrive v5 at 300mA in because this host was made for my 12x build!!!!iam waiting for my host from DX to come in that i am going to put this build in but in the mean time i put in it in this host intill my other host comes in to put it in the right place(I could not wait iam so hooked on lasers now:crackup

well let me know what you guys think of it..???

heres the link: YouTube - Blu Ray laser pointer PHR-803T

can some one please tell me how to post pics because ive got some and how to acutlly post your video on this forum i cant figure it out thanks.......

lazerboy123 · Jan 8, 2010

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm PHR-803T

!!!!!!ALL THIS PICS WERE TAKEN WITH SMOKE IN THE ROOM!!!!!

WHEN I GET MY HOST FOR THIS BUILD I WILL POST NEW PICS WITH THE NEW HOST FOR THIS BUILD.......

lazerboy123 · Jan 8, 2010