how to press diodes

[guastafeste]

hi guys
i just wanted to know what do i need to press diodes in the aixiz modules....
i have never done it before, that is why im asking.
i once saw somebody on the forum selling a little tool to do the job........anybody remember who it is?
anybody can tell me what i need and maybe where to buy?
thanx

 

[ben74]

It's not the best way but if you use the end of the AixiZ module and turn it around and put the diode pin through then take the lens out and hammer the back or the AixiZ.

Like i said it's not the best way but it works.


Hope this helps,
Ben

 

[Things]

Sit the diode into the hole to be pressed into, put the back of the aixiz module over the diode pins, and put it all in the vice. Gimme a sec and i'll draw up a MS paint diagram.

Here:

 

[rog8811]

Don't use the back of the module it will only press the LD flush, it needs to be all the way in.
Use a bike brake adjuster as per pictures......

Regards rog8811

 

[guastafeste]

thanx to all
i will try the bike brake adjuster...thanx Rog!!!!