Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Host to use 26650 Battery and 9mm 445nm

HTID

0
Joined
Oct 8, 2009
Messages
46
Points
0
Hello,

Just a really quick question, I would like to use DTR's 9mm diode in the standard copper module with built in driver inside a HOST that will run of 1 26650 size battery,

The host should be easy for installation, and provide a suitable heatsink for the module, or possible a heatsink can be easily sourced and added...

Links or pictures would be greatly appreciated :)

Here is what I considered using from DX, has anyone used these in the past and know they will be good for the job?

TrustFire A8 Cree XM-L T6 650lm 5-Mode Flashlight with Holster - Grey (1 x 26650) - Free Shipping - DealExtreme

SingFire SF-313 Cree XM-L T6 600lm White 5-Mode Zooming Flashlight - Black (1 x 26650) - Free Shipping - DealExtreme

THANKS
 





Those are nice I like the second one the best.

Here's my favorite for a 26650 host, the C-88 you can see it in my sig and here is a picture of a couple I just finished the focus adapters for.

You can see they have a massive heat sink for High Power builds :D


 
very nice, any other suggestions? im looking for a host kit with heatsink that will fit the module and driver with little work... hehe
 
The one I linked to is all that you mentioned. Very nicely designed host by one if the masters :)
 
you will need 2 cells to run the laser if the driver is the x-drive that dtr uses.
 


Back
Top