Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Host’s Engineers !






Oh yeah I remember. He actually tried to pull a fast one on everyone one last time but failed miserably. Claimed he was poor while taking a vacation to Japan.
 
paul1598419 said:
You know I never bought a laser from him. I feel badly for those who did.
Click to expand...
I bought my first high power 1W laser from him. Didn't he also go by the name Joker?
I only had 532's and a 301 red laser at the time.
The beam was awful and never tight and I tried every lens I had. I just thought thats how rhese 1, 2, 3 W's were. It got worse and worse over time and could barely scorch a popsicle stick anymore.. It just was a wide faded blur..

A little time later Rich built me a PLTB450B1 "1.6W" What a nice tight beam even with the G2 lens.
Then Rich built me a M140 build.
Mind you I was very new to lasers. The M140 also put a nice beam and the Sci Fi build was suppose to have a M140 also but had that awful beam.
I kept asking Rich if he put a PLTLb450B1 diode in the M140 build by mistake because the beam was so much better than the Sci Fi M140.
Put Rich through **ll by asking. I did tell Rich I was just as happy with the PLTB450B1 if it was a mistake..

I kept looking at the diodes glass on the Sci Fi build and it looked ok, to me at least.
I sent it to Rich and he found the diodes glass to be bad. He decanned it and it fixed the beam issue. Although like I had said there were no markings on it and was heavily used plus all the other ruthless disgusting cheap parts.
This Joker Dumpster dived to look for parts.. If you see the pics of his laser insides you would truly believe me.
Barely used solder and would squeeze no strand steel AC wire to make polarity connections.

The Joker posted a picture of his I think Jetta that was all modded. I mean top top notch after market parts like twin turbos, huge intercoolers, laptop controlled ignition and air/fuel mixture etc. and upgraded completely swapped out suspension and tires to match.
Easily at least $30,000+++ worth, i'm probably low balling it and the top notch plumbing!! not the car, thats a whole other deal :whistle: but parts on our money. Then his pics with his partner at Euro Disney.

Thank RedCowBoy for starting the continued posts of bring him down :)
 
Last edited:
Unown (WILD) said:
Amak I have really tried with you. You still haven't reached 20 minimum posts. Your sig even says "
Custom Retrofit Upgrades for the Thor H & Gatling style hosts.

Custom Convoy Host Builds Available, hit the DM"
Can you give a good enough excuse as to why you have ignored my many warnings?
Click to expand...
My bad man, those have been there since i signed up. I’ll take them down. I honestly didn’t even remember I did that.
 
GSS said:
I bought my first high power 1W laser from him. Didn't he also go by the name Joker?
I only had 532's and a 301 red laser at the time.
The beam was awful and never tight and I tried every lens I had. It got worse and worse over time and could barely scorch a popsicle stick anymore.. It just was a wide blur..

A little time later Rich built me a PLTB450B1 "1.6W" What a nice tight beam even with the G2 lens.
Then Rich built me a M140 build.
Mind you I was very new to lasers. The M140 also put a nice beam and the Sci Fi build was suppose to have a M140 also but had that awful beam.
I kept asking Rich if he put a PLTLb450B1 diode in the M140 build by mistake because the beam was so much better than the Sci Fi M140.
Put Rich through **ll by asking. I did tell Rich I was just as happy with the PLTB450B1 if it was a mistake..

I kept looking at the diodes glass on the Sci Fi build and it looked ok, to me at least.
I sent it to Rich and he found the diodes glass to be bad. He decanned it and it fixed the beam issue. Although like I had said there were no markings on it and was heavily used plus all the other ruthless disgusting cheap parts.
This Joker Dumpster dived to look for parts.. If you see the pics of his laser insides you would truly believe me.
Barely used solder and would squeeze no strand steel AC wire to make polarity collections.

The Joker posted a picture of his I think Jetta that was all modded. I mean top top notch after market parts like twin turbos, huge intercoolers, laptop controlled ignition and air/fuel mixture etc. and upgraded completely swapped out suspension and tires to match.
Easily at least $30,000+++ worth, i'm probably low balling it and the top notch plumbing!! not the car, thats a whole other deal :whistle: but parts on our money. Then his pics with his partner at Euro Disney.

Thank RedCowBoy for starting the continued posts of bring him down :)
Click to expand...
I remember the car he posted, Many people complained about the lasers he was selling the stop turning on i fix 2+ where the wires just came off from funny looking drivers i replaced the driver and wires and ship it back to members i also replaced 1 diode for one member where the diode was a A140 and he sold it as M140 😵‍💫
 
GSS said:
I bought my first high power 1W laser from him. Didn't he also go by the name Joker?
I only had 532's and a 301 red laser at the time.
The beam was awful and never tight and I tried every lens I had. It got worse and worse over time and could barely scorch a popsicle stick anymore.. It just was a wide blur..

A little time later Rich built me a PLTB450B1 "1.6W" What a nice tight beam even with the G2 lens.
Then Rich built me a M140 build.
Mind you I was very new to lasers. The M140 also put a nice beam and the Sci Fi build was suppose to have a M140 also but had that awful beam.
I kept asking Rich if he put a PLTLb450B1 diode in the M140 build by mistake because the beam was so much better than the Sci Fi M140.
Put Rich through **ll by asking. I did tell Rich I was just as happy with the PLTB450B1 if it was a mistake..

I kept looking at the diodes glass on the Sci Fi build and it looked ok, to me at least.
I sent it to Rich and he found the diodes glass to be bad. He decanned it and it fixed the beam issue. Although like I had said there were no markings on it and was heavily used plus all the other ruthless disgusting cheap parts.
This Joker Dumpster dived to look for parts.. If you see the pics of his laser insides you would truly believe me.
Barely used solder and would squeeze no strand steel AC wire to make polarity collections.

The Joker posted a picture of his I think Jetta that was all modded. I mean top top notch after market parts like twin turbos, huge intercoolers, laptop controlled ignition and air/fuel mixture etc. and upgraded completely swapped out suspension and tires to match.
Easily at least $30,000+++ worth, i'm probably low balling it and the top notch plumbing!! not the car, thats a whole other deal :whistle: but parts on our money. Then his pics with his partner at Euro Disney.

Thank RedCowBoy for starting the continued posts of bring him down :)
Click to expand...
He did use the name Joker. Sorry you had this issue. I built all my own lasers and never got anything from him but some lenses and a couple hosts. Mine were fine. I'm glad he's gone.
 
paul1598419 said:
What diode did you use in this? Looks like it doesn't have the terrible divergence of other high power reds.
Click to expand...
I purchased it form Rick, Laser 1 & 2 & 7, Laser 8 Escaped to Alaskan 👾

Collection Sale! Added items, prices LOWERED!

Hey everyone, I have been away for a while due to life. I have a new girlfriend and work is busy, I just got promoted, so life is great, but not much time to make lasers, I am keeping almost all my laser making stuff for now, but I think it's time to sell some of my collection to folks who would...
laserpointerforums.com

collection.jpg
 
Alien Laser said:
I purchased it form Rick, Laser 1 & 2 & 7, Laser 8 Escaped to Alaskan 👾

Collection Sale! Added items, prices LOWERED!

Hey everyone, I have been away for a while due to life. I have a new girlfriend and work is busy, I just got promoted, so life is great, but not much time to make lasers, I am keeping almost all my laser making stuff for now, but I think it's time to sell some of my collection to folks who would...
laserpointerforums.com

View attachment 77858
Click to expand...

Wonder how I missed that.
 
Alien Laser said:
I purchased it form Rick, Laser 1 & 2 & 7, Laser 8 Escaped to Alaskan 👾

Collection Sale! Added items, prices LOWERED!

Hey everyone, I have been away for a while due to life. I have a new girlfriend and work is busy, I just got promoted, so life is great, but not much time to make lasers, I am keeping almost all my laser making stuff for now, but I think it's time to sell some of my collection to folks who would...
laserpointerforums.com

View attachment 77858
Click to expand...
Wow!! I wish I held onto some of those! I forgotten all about a couple of them. I still think about that last one ehgemus built for me.
 
Alien Laser said:
Not yet sometimes it takes couple days, have you see this the nice :alien:
Click to expand...

The beauty of the first one is comprehensible by humans, but the other one is comprehensible only by aliens!! 😅


Amak87 said:
Hey I’ll take you up on that offer!! Haha

Also working on a simple multidiode array for handhelds as well.. let me know if you would like to have a chat and I can send over what I’ve done and my ideas.. I know the community would love the new projects..
Click to expand...

Interesting project!
but at first look, it is concerning though. I have so many questions! haha.
you can PM me the details, I might be able to help not only with a mechanical thing but also might be able to create a new driver solely to control the target temperature (maximizing battery life by not powering the TEC at maximum power every time)
 
You must log in or register to reply here.


Back
Top