Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Help on First Build

  • Thread starter Thread starter Jizzanthapus
  • Start date Start date
If I set my driver to a little below 350mA would that be better for the diode and have a longer life? The only thing is I wouldn't want the power to go down too much. If it was set to like 325mA how much would it lower the output of the diode?
 





Not sure, there are plotted graphs somewhere on here you'll just have to use the search button below ;)
 
@jizz 2 things, could you please explain to this older member about how to pronounce your username, I'm a little tossed on it's proper meaning as well.

After that I see that you have #34 posts of being painfully spoon-fed over a 1 week period.
You have buried some very useful post with some mundane questions that are but one click away in the search feature. While I applaud those whom have been helping you along this thread I ask you to please read, re-read, and read some more before you would seemingly achieve a vet post count on your first build thread.:na: Thank you in advance.:thanks:

P.S. search you-tube for laser driver set up and you will be amazed. If for some reason you are unable to have the use of your hands or are handicapped in some other fashion then please disregard my statements and accept my humble apology.:undecided:
 
The name actually came from Louis CK it basically has no significance or means anything haha. Pretty funny story though...
And I apologize for the "painful spoon-feeding" that's definitely not what the purpose of this thread was supposed to be. I've been searching and reading a lot and was still slightly confused. I'll continue to search more, and again sorry about that.
 
If you still get stuck, click on the links on my sig, I have a few tutorials on there, The trustfire one should suffice
 
Ok, I just finished it, but it's not working. I don't know what I did wrong, everything seems fine :undecided:. I'm thinking maybe it's one of my solder connections. I can upload pics of it tonight.
So I took some pictures, sorry they're blurry I had to use a really bad camera.
Am I missing something? I can't see what's wrong. Could it be a cold solder joint? Cause the solder joints do look pretty bad.
 

Attachments

  • 21.jpg
    21.jpg
    115.9 KB · Views: 56
  • 24.jpg
    24.jpg
    110.2 KB · Views: 55
  • 22.jpg
    22.jpg
    115.7 KB · Views: 62
  • 20.JPG
    20.JPG
    104.9 KB · Views: 51
Last edited:


Back
Top