Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Help lasershow






Hello.

I use the most economic software. IShow LaserShow.

For my budget, I cannot allow myself Pangolin (I would like a lot of east software, since everybody speaks very well of him).


sv1cvq.jpg



sv28so.jpg






Best Regards.
Juanma.
 
All I can say Juanma, is; WOW thats one incredibly neat and tidy setup. And your beam photography skills is great too! Well done! Are your lasers analogue or TTL?
 
Thank you vk2fro.

They are modules economic TTL; if later on I can allow, I would like to mount a projector with better components and that these are analogical.

I have surprised myself with this projector. I didn't have idea of as beginning, of the necessary thing for it, single desires of to learn and to build it.
Everything has been thanks to your help.


300430n.jpg




Best Regards.
Juanma.
 
Last edited:
I like how you have mounted the lasers on threaded rod "stilts" to raise them up to the proper height. If you do get bigger lasers, you may need to switch to shims so the heat load of the bigger lasers is dissipated. With these small lasers though, the heat load should be effectivly dissipated through the body of the laser.

When you do decide to upgrade to analog lasers, you'll need to ditch the ishow, as it only does TTL. I should have my Quickshow in a month of so, so I'd like to help out with this. I've got a framestreamer express currently. Its analogue, has size controls on the box, and works with quite a few laser show softwares, including Norms Laser Show, LSX (Dr Lava), Pasta (Gary), and a few others. (When mentioning pasta, think of the long thin type you have with bolognaise. Type that into google along with laser show and you'll find it. Due to a small war between users about it, the softwares true name is censored here). You can also find its true name on Dans laser projector faq. Back to the frame streamer, your welcome to have it for the cost of postage.

Thats a REALLY neat build, and looks like you can just about drop it into an enclosure (on more threaded rod stilts) and put the power supplies underneath. Thats how my design is going, optics & lasers on a raised platform, power supplies underneath.
 
Yes, that you speaks.

In fact, Gary has given me a license of his software, so that it uses it with the hardware of Ishow. I he am very grateful hence and I think that it is a brilliant type with desires of helping those that begin in this liking.
I am very new and beginner, but I am willing to help in what is in my hand.

My great problem is the language and I am not sure that they understand all that I write and as I want to transmit it.: Indecisos:



Best Regards.
Juanma.
 
Last edited:
This whole thread is really impressive, the progress you've made from knowing almost nothing at the start to assembling that projector was astounding. I really like the designs of your optical mounts as well, they look very well made. Looking forward to more pictures of this as it progresses :beer:
 
Addonex said:
This whole thread is really impressive, the progress you've made from knowing almost nothing at the start to assembling that projector was astounding. I really like the designs of your optical mounts as well, they look very well made. Looking forward to more pictures of this as it progresses :beer:
Click to expand...




Thank you for their words.

I try to learn soon, although I have many problems with the understanding of their language and I suppose that my explanations will be confused for you.
For that reason I ask for forgiveness for my expression with their language.

I show them drawing for the box of the projector.

I want to put two fans of refrigeration of 80mm of diameter; one that introduces the air and another that expels him.
The Power Supply screwed to the interior part of the superior cover.
The connections in the back part.
And in the leading, the micro with the regulator.


Doubts that I have... to put some glass in the window of the projector?
Is to window of 50mm of diameter valid?


2dt1861.jpg



If there are errors, or they come better solution, please say.


Best Regards.
Juanma.
 
Last edited:
I'm not sure what other people think, but I've thought that it'd be a good idea to have the projector pretty much sealed from the environment, and then have semi-external mechanisms to cool the base-plate and such. I'm not sure if that's commonplace though.

For your window, you can try using a 52mm or 58mm UV camera filter. Many are multicoated for enhanced light transmission.
 
Bionic-Badger said:
I'm not sure what other people think, but I've thought that it'd be a good idea to have the projector pretty much sealed from the environment, and then have semi-external mechanisms to cool the base-plate and such. I'm not sure if that's commonplace though.

For your window, you can try using a 52mm or 58mm UV camera filter. Many are multicoated for enhanced light transmission.
Click to expand...

Hello friend.
Very grateful for so many times that your you have helped me.

Please, where I can find the 52mm or 58mm UV camera filter?
Is it correct that these they can enlarge the transmission of the light?



Best Regards.
Juanma.
 
No problem! You've made good progress on your build. It's great seeing your projector come together.

You can get the UV filters at virtually any camera shop. Her'e's an example on Amazon.com. You'll probably want a multi-coated filter because they'll reduce the amount of reflections (i.e. losses).

Other types of glass you can try: glass from photocopier or scanner beds. Flashlight glass (like this).
 
Hello friends.


When using preinstalled graphics of Show Card (without using DAC Ishow)... everything reproduces correctly, color, fixed image and in movement.

This is the card:

http://www.djslighting.com/eng/supports/specifi/show% 20card.pdf


These the galvos:

http://www.djslighting.com/eng/supports/specifi/30K% 20Scanners.pdf


And this ISHOW:

http://www.amonstar.com/template/file/iShowEn_instruction.pdf



When I use Ishow (DAC and it programs) and software wet noodles with DAC Ishow; all the images notice they deform and they blink (modules laser, light and they fade, I believe that too slow), this makes him to be noticed and bother the twinkling a lot.
The images in movement are not deformed, but all blink as the fixed ones.
I think that it was problem of galvos speed... but now I do believe that the scanner speed is correct and that where it lacks speed? it is in the modulation of the three colors (RGB). This makes that the image in an intermittent way is represented.
For that reason I believe that it is problem of DAC Ishow.



Best Regards.

Juanma.
 
Last edited:
If your galvos are too slow for the image they'll either need to render the image at a slower rater--which can have a lower refresh rate (possibly flickering), or there will be deformations in the image. Something you can try is to reduce the scan angle used by your galvos so that they do not need to travel as much to reproduce the image, and therefore will render things faster.
 
Depends like BB said, on how fast your galvos are. You can ruin them by scanning them too fast. Also TTL lasers will introduce a little more flicker as some frames may have colours that are borderline signals to your lasers, thus causing them to flick on and off. a very dark green for example may cause this, as the green laser needs to be at a low power to produce the colour.

If the software has the options, I'd be checking to see if you have picked "TTL" as the laser type.

If your galvos are rated to 20kpps, keep the scan speed below this. If they're rated at 25Kpps, 35Kpps max, you can scan at 35kpps, but only with a small angle.

Either way if they start making horrible noises you're scanning them too fast. Back off the angle or scan speed, or you'll ruin them.

Cheers
Ben
 
You must log in or register to reply here.





Back
Top