Has anyone worked with this host?

[ColdWelder]

Is anyone familiar with this? will it fit a small heatsink?
http://www.dealextreme.com/p/mini-pen-style-100lm-1-led-white-light-flashlight-1-x-aaa-105641
Well, that embarassing. :*) Thanks for having my back today Dave!

 

[daguin]

Link and/or picture missing

Peace,
dave

 

[bobhaha]

Nope... but anything can be done. It should be easy enough as long as the inner dia is greater than 12mm

 

[Eudaimonium]

Nope... but anything can be done. It should be easy enough as long as the inner dia is greater than 12mm

Well actually it'd had to be more than that if you're aiming for a heatsink for an Aixiz - you can't machine out aluminium foil and install a set screw in it.

If you're going for Direct pressfit heatsink, it doesn't really matter, inner diameter can be as low as 10mm, you only really need to fit the 9mm wide thread for the lens.

 

[lazeerer]

This host has been worked or used before with memeber Qumefox in i think quit few different build. Also Ive worked on the 2x AAA one aswell.

The inner diameter of the host is smaller then 12mm. You will have to make a custom press fit heatsink or turn down an Aixiz Module.

However your driver of chose must be small. There is very little wiggle room in these hosts.

Good Luck.:beer:

 

[ColdWelder]

Awesome thanks guys! I was thinking of using a green o-like module And a 10280 battery. I just want to make sure i get a nice, snug fit for the module. And heatsinking would be nice. I ordered a few to play with, so I guess we will see.