Groove 1A ?

[daguin]

Is this what your setup looks like?

Thanks for the picture DTR.

It should be noted that THIS setup ONLY works for measuring output current on a LINEAR driver (Groove2, Rkcstr, etc.). With a boost or buck type driver (microflex, microboost, etc) the current measured this way will be incorrect.

We also need to see what he is using as a test load.

Peace,
dave

 

[Used]

yes dtr i'm doing the same thing in the diagram, I find 4.5 mA

Anyway I have been taken ill because it's practically a 4.5 mA current draw, I'll make a video tomorrow

 

[DTR]

yes dtr i'm doing the same thing in the diagram, I find 4.5 mA

Anyway I have been taken ill because it's practically a 4.5 mA current draw, I'll make a video tomorrow

As Dave has asked a few times. What are you using as a test load?

 

[Used]

I point the''blue box''and I go through the resistance 10w 1ohm, then I manipulate the ways several times and I found the test load 750ma-990ma