Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Groove 1A ?

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Is this what your setup looks like?
currenttest.png

Thanks for the picture DTR.

It should be noted that THIS setup ONLY works for measuring output current on a LINEAR driver (Groove2, Rkcstr, etc.). With a boost or buck type driver (microflex, microboost, etc) the current measured this way will be incorrect.

We also need to see what he is using as a test load.

Peace,
dave
 





Used

0
Joined
Feb 15, 2011
Messages
11
Points
0
yes dtr i'm doing the same thing in the diagram, I find 4.5 mA

Anyway I have been taken ill because it's practically a 4.5 mA current draw, I'll make a video tomorrow
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
yes dtr i'm doing the same thing in the diagram, I find 4.5 mA

Anyway I have been taken ill because it's practically a 4.5 mA current draw, I'll make a video tomorrow

As Dave has asked a few times. What are you using as a test load?
 

Used

0
Joined
Feb 15, 2011
Messages
11
Points
0
I point the''blue box''and I go through the resistance 10w 1ohm, then I manipulate the ways several times and I found the test load 750ma-990ma
 




Top