Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

GB FAILED!! for scansets from DT

Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: GB STARTED for scansets from DT

You can use any PSU that supplys +/- 24v, most are only +24v so that's the trick finding one that is +/-24v. The only one like that on that page is 2004 model. Another way to do it is to use two +24v PSUs @ about 1A each. Hope this helps. The stock PSU should get you by for a while. Its said to be slightly under spec and that puts you at the scanners protection circuit thresh hold hence the need for something with slightly more current. 1.5A would probably be ideal, however I am having trouble sourcing something like that. The problem is the higher current PSUs tend to be larger thus not being suitable for certain applications.

YES that definetly helps-- so the -/+ denotes switching PS?
any guess as the the cost of that 2004?
I understand why the prices are not listed but still dont like that.
I will take a look on FeeBay, thanks again.
:beer:
 





Joined
Dec 1, 2008
Messages
878
Points
28
Re: GB STARTED for scansets from DT

Id wait and see if you actually need one before you buy anything....I have hundreds of hours over the last 2 years on my scanners with no problems so far....
 
Joined
Apr 2, 2009
Messages
10,662
Points
113
Re: GB STARTED for scansets from DT

I will do that Brooks.
You have been very helpful from day one.
Hope to shake your hand someday soon. Let me know if you do any gigs near Houston.

Len

shooting you a +2 now
 
Last edited:




Top