Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: SolarForce L2P Kit! - 18650 Host With Massive Heatsink...

@cracked, I can confirm that heatsinks compatible with L2P's will work in the L2T. I have a 635nm laser in my L2T and it is friggin sweet.
 





cracked said:
Jay,

Any idea yet if you can do all of this with the L2T host?

Solar Force L2T Flashlight Host for 18650 - L2 Host Black Finish

It's 4mm shorter than the L2P, comes with a forward clicky instead of the reverse clicky on the L2P, doesn't have a silly "attack" bezel, has a sexy ultra matte finish, and costs a few $ less. It accepts the same drop-in modules as the L2P, so your heat sink may already be good to go. But can the L2T bezel also be made into a one-piece focus ring...

If you're up for experimenting, I'll offer to order one (for a start) to you directly.
Click to expand...

Yep, I'm sure I can make the bezel focus design work in the same way...

Just PM me about sending me the host... :beer:
 
Hi
I have 3 questions:
1. How many 18650 fit inside? 1 right?
2. The Custom focus knob is the big one or is that the little one?
3. How long is your back log of orders?

Anyways awesome host and heat sink.
 
skavier480 said:
Hi
I have 3 questions:
1. How many 18650 fit inside? 1 right?
2. The Custom focus knob is the big one or is that the little one?
3. How long is your back log of orders?

Anyways awesome host and heat sink.
Click to expand...

Hi,

I'm about a week out...

Building in the order of 'date paid' to be fair to those waiting.

This host fits a single 18650, or 2 X RCR123 cells.

For this build, there are a couple options for the Focus adapter as shown in the first post.

The 'custom focus knob' is a small knurled focus adapter.

The coolest one, is the 'bezel focus' option. With that option, you turn the bezel to focus. :cool:

Just send me a PM for ordering! :beer:
 
what driver comes with the Hot option?
and i saw that you got your hands on Lazeere's X-Boost,
are you selling them too?
 
skavier480 said:
what driver comes with the Hot option?
and i saw that you got your hands on Lazeere's X-Boost,
are you selling them too?
Click to expand...

Yes I have the X-Boost drivers... :)

I stock a few specifically for my 'Hot' option kits, but do not sell the bare drivers...
 
they are adjustable right? with this little metal thing on them.
also is it easy to change the custom focus knob from a normal AixiZ module?
 
skavier480 said:
they are adjustable right? with this little metal thing on them.
also is it easy to change the custom focus knob from a normal AixiZ module?
Click to expand...

I have the X-Boost adjustable (1A to 1.6A) drivers. Yes they have a pot for adjusting the current. But obviously you have to have a test load to adjust it properly, etc...

The custom focus knob is similar in size the the AixiZ focus ring, and yes, it is threaded to fit the top of your lens...
 
I would like to purchase a standard position L2P heatsink. I will be using a 12mm module and would like to use a FMT V2 driver (15.8mm diameter), will it fit inside the driver cavity without modification? Please let me know where to send payment.
Thank you.
 
LaserInMyPocket said:
I would like to purchase a standard position L2P heatsink. I will be using a 12mm module and would like to use a FMT V2 driver (15.8mm diameter), will it fit inside the driver cavity without modification? Please let me know where to send payment.
Thank you.
Click to expand...

Sending PM... :beer:
 
Thanks for the bad ass host jay! Love my first build, and like you said its worth the wait and it was!!
 
cncyana said:
Does this heatsink work with the Solarforce L2D side-clicky host?

https://www.solarforceflashlight-sa...orce-l2d-blk-ha3-front-switch-flashlight-body

Some ideas: The reverse clicky can be replaced with a forward clicky or forward momentary switch and the plain switchless L2D tailcap can be replaced with a regular Solarforce clicky tailcap - for a dual switch system.

Thank you.
Click to expand...

This thread last had a post 4 years ago--not likely you are going to get any response. PM or email Jayrob and ask he is not active much on LPF any longer,

You can probably guess that it will not fit as an L2P host head is 32mm and L2D is 35mm but ask Jayrob
 
Last edited:
cncyana said:
Does this heatsink work with the Solarforce L2D side-clicky host?

https://www.solarforceflashlight-sa...orce-l2d-blk-ha3-front-switch-flashlight-body

Some ideas: The reverse clicky can be replaced with a forward clicky or forward momentary switch and the plain switchless L2D tailcap can be replaced with a regular Solarforce clicky tailcap - for a dual switch system.

Thank you.
Click to expand...

Yes to your question...

This kit is one of my most popular along with my Mag kits.

I'm not on the forum posting a lot these days, but still respond to my threads and PM's. :beer:
 
You must log in or register to reply here.





Back
Top