FS: Sanwu Laser store - RGB handheld lasers, 405nm,445nm,465nm,470nm,505nm,515nm,520nm,525nm,635nm,650nm

[Theodore41]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

I wait mine in a couple of days.

 

[Podo]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Two Special 7.5W(7500mw) 445nm spiker lasers are in stock.:drool:
Get it on our store now ! This item will be taken out after two orders.

https://www.sanwulasers.com/product/spikerspecial

 

[Podo]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Both units are expected to peak at ~8W. We can lower the output if you want a more stable performance.:evil:

 

[Sta]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Two Special 7.5W(7500mw) 445nm spiker lasers are in stock.:drool:
Get it on our store now ! This item will be taken out after two orders.

https://www.sanwulasers.com/product/spikerspecial

Very tempting... If I wasn't going to build one myself, I'd buy it!

By the way, what's the total diameter of your 3x beam expander?

 

[Gabrielvl]

My review to sanwu laser spiker

Hi
As I promised, I review my spiker laser. I hope you guys enjoy it, because I try to be fair, and unfortunately my accent is not the best. English is not my main language

Here is the link to YouTube :

https://youtu.be/pwQ_3s6V6RQ

 

[Podo]

Re: My review to sanwu laser spiker

Hi
As I promised, I review my spiker laser. I hope you guys enjoy it, because I try to be fair, and unfortunately my accent is not the best. English is not my main language ����

Here is the link to YouTube :

https://youtu.be/pwQ_3s6V6RQ

Thank you! nice review. +rep

The beam is hard to catch for the camera under daytime but it did burn well for sure.

 

[RedCowboy]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Very tempting... If I wasn't going to build one myself, I'd buy it!

By the way, what's the total diameter of your 3x beam expander?

At it's widest it is 1.125 inches across the large end, the exit lens is just over 1 inch wide across the exposed glass.

 

[Gabrielvl]

Re: My review to sanwu laser spiker

Thank you! nice review. +rep

The beam is hard to catch for the camera under daytime but it did burn well for sure.

Welcome!
I chose to make the review during day, to see all clear, and the beam is quite visible and in full day, just my camera was not the best. I use a Samsung galaxy note 4 for that.

PS i want a beam expander, but first I must save some money, for that

 

[Sta]

Re: GUIDE: Which company should I buy from?

At it's widest it is 1.125 inches across the large end, the exit lens is just over 1 inch wide across the exposed glass.

@#$%!!!
That is just slightly wider than what I need.

 

[RedCowboy]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Really, they are quite compact for the fantastic results you get, they even look good and fit my 638nm 303 style host.

 

[Gabrielvl]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Podo#
Fell free to share my review, as a review for spiker
https://youtu.be/pwQ_3s6V6RQ

 

[EllyEnthusiastic]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Here: https://www.youtube.com/watch?v=L6bsMpW6Snk

If you coudn't switch mode, your driver might be single mode.

Well, I can swap to safety mode. Unless all your lasers have that functionality, I think I have a multimode.

 

[RedCowboy]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

I would chose the ON/OFF option, but I can see where a safety interlock would be good.

 

[Frankie9011]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Ordered a 1W 520nm Silver series laser two days ago with the beam expander. I have wanted a 1W+ 520nm for a while (basically since they came out), but when those diodes were $800+ I just couldn't justify it. Now with an offering like this, it's a price I'm willing to pay.

Opted for the multi mode driver with the G7 lens. Francis says they'll push the diode as close to 1.4W as possible. So excited! Been so long since I got a new laser..

 

[HydroSean]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

So does the beam expander fit the copper modules from DTR? Like does it screw in or do I need to fit it or put an adapter on it?

 

[RedCowboy]

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

You use this adaptor from sanwu to screw your regular M9 x 0.5 lens such as 3 element or G2 into and the expander on the other side.

On this big homemade clunk I used some washers to set my 3 elements focus depth at 5 meters, or you can use your heat sinks set screw and push your module back , it's simple, regular lens on 1 side and expander on the other.

Thread here >>> http://laserpointerforums.com/f65/my-nubm08-beater-98251.html#post1436909