Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: New Pen Host Kits! Switch board with Spring Option - Nice!

Status
Not open for further replies.
Do you have a tracking code? Because first-class usually gives an useless tracking code that updates sometimes, anyways... no problem if you don't

=)
 





No tracking unless you pay for tracking. I always ship first class unless you specify something different...
 
Jayrob, I happen to have a kit of these in hand. I need to assemble it for 2000Revolution. I don't exactly know how to make the plastic driver mount stick in the pen. What I did was directly solder the flexdrive to the LOC pins and then connect the driver mount to the + input of flexdrive. Since I shorted the case pin to the neg pin of the LOC, there is no need for a - wire in the input. Anyway, my question is, what can I use for a tiny switch( I lost the one which came with it ) and how do you stick the plastic/driver mount in the pen?
 
Just a momentary button switch. But you need to build it onto a board and mount it into the black plastic part that is designed to hold the switch...

Or you can get the switch board shown: (which makes it a lot easier to assemble)
Pen%20host10.jpg


More details and pictures in the first post...
 
Hmm, I still don't get it, I have all parts except the plastic small switch. Do I just need to mount a momentary switch on the outer surface of that black driver holder? The momentary button is ALREADY on the stock driver with the spring. Sorry but I'm confused :/
 
Silvershot said:
Hmm, I still don't get it, I have all parts except the plastic small switch. Do I just need to mount a momentary switch on the outer surface of that black driver holder? The momentary button is ALREADY on the stock driver with the spring. Sorry but I'm confused :/
Click to expand...

Here's a post from iknitsteel that shows how to do it:
http://laserpointerforums.com/f64/f...rd-spring-option-nice-22561-5.html#post553699

It's either that, or get the little switch board that I offer as an option for these pens. (shown in the first post)
 
Yea I understood that, but as soon as you insert the whole black holder in the pen, there is nothing sticking out of the pen through the button hole. That's what I need.
 
You'll have to glue the holder in place where you need it to be, and then you need the tiny black button shown here: (left of the holder)
Pen%20host1.jpg


If you lost it, then I happen to have an extra and can drop it in an envelope. Just PM me your address...
 
Awesome I would be interested in a couple of those when I get some money in hand. once again-:bowdown:
 
Sorry I was gonna use a PHR but I got it BROKEN!!!! not having a good day. so I wont be buying one till I can get a new diode and some more money.:cryyy::cryyy:
 
Sure it's $3 dollars plus $2 dollars shipping. (U.S.)

Send me a private message for ordering...
 
Status
Not open for further replies.





Back
Top