FS : New Copper Module perfect for G8 lens

[thanhtung]

the new copper Axizs are longer and work perfectly on G8, better on all other lens G2, G7, 2el, 3el...
Diameter:11.98mm +- 0.01mm
Length: 14.07mm+-0.01 (old Aixiz is 12.01mm and the new aixiz is longer 2mm)
Thread M9x0.5
Price : 3.5usd/pc
• 10 - 50pcs : 3 usd/pc
• 51 - 150pcs : 2.5 usd/pc
• 151 - 1000pcs: 1.99 usd/pc
At now i have only in my stock 2000 pcs for 9mm, 150 pcs 5.6mm, 150 pcs 3.8mm

HERE IS PIC FIT WITH G8 LENS :

AND HERE IS PIC FIT WITH G2 LENS:

My diode in the my pic test is NUBM44

Here is pic 5.6 fit with Mitshu P73
At Ebay, Aliexpress or else somewhere... When you fit diode mitsu P73 in module can not use G8 lens, but with these new copper modules, it work perfectly

And here is pic fit 3.8mm violet 900mW+

My second factory for CNC axiz copper heatsink, and every else things ,

 

[Giannis_TDM]

Will you make any for 3.8mm and 5.6mm diodes?

 

[thanhtung]

Will you make any for 3.8mm and 5.6mm diodes?

Yes, 3.8 and 5.6 i will make them

 

[Giannis_TDM]

Yes, 3.8 and 5.6 i will make them

5 3.8, 3 5.6 and 2 9mm will be 25$ right?

 

[thanhtung]

5 3.8, 3 5.6 and 2 9mm will be 25$ right?

5 x 3.8; 3 x 5.6; 2 x 9 —> total 10pcs => 3usd x 10 = 30usd + costship and fee paypal 5%

 

[Giannis_TDM]

5 x 3.8; 3 x 5.6; 2 x 9 —> total 10pcs => 3usd x 10 = 30usd + costship and fee paypal 5%

I see I missread, Ok ill think about it and see, How long would it take you to make them?

 

[thanhtung]

I see I missread, Ok ill think about it and see, How long would it take you to make them?

I can make 500pcs in a week
Or 5000pcs in 5 days depend your order

 

[Lifetime17]

the new copper Axizs are longer and work perfectly on G8, better on all other lens G2, G7, 2el, 3el...
Diameter:11.98mm +- 0.01mm
Length: 14.07mm+-0.01 (old Aixiz is 12.01mm and the new aixiz is longer 2mm)
Thread M9x0.5
Price : 3.5usd/pc
• 10 - 50pcs : 3 usd/pc
• 51 - 150pcs : 2.5 usd/pc
• 151 - 1000pcs: 1.99 usd/pc
At now i have only in my stock 150 pcs for 9mm
And 150pcs 5.6mm & 3.8mm

HERE IS PIC FIT WITH G8 LENS :

AND HERE IS PIC FIT WITH G2 LENS:

My diode in the my pic test is NUBM44

Hi T,
Gets some pics of the beam to were focused to a dot further away. This pic doesn't say to much for the divergence on the NUBM44.But the lens seats deeper in the 12mm module.
Rich

 

[Giannis_TDM]

Hi T,
Gets some pics of the beam to were focused to a dot further away. This pic doesn't say to much for the divergence on the NUBM44.But the lens seats deeper in the 12mm module.
Rich

keep in mind his module is 2mm longer.

 

[Lifetime17]

Hi G,
I was only stating that the lens seats deeper thats a plus, instead of hanging on by two threads. But I would like to see the dot at about 15Ft. or so. This is a great addition to the G8 focal point.
Rich

 

[thanhtung]

Hi G,
I was only stating that the lens seats deeper thats a plus, instead of hanging on by two threads. But I would like to see the dot at about 15Ft. or so. This is a great addition to the G8 focal point.
Rich

Why do you want to see the dot at about 15?
You can check it for yourself by the way fit g8 for your nubm44 !

 

[gazer101]

I am curious too tho, what is the spot size using G8 vs G2?

 

[thanhtung]

I am curious too tho, what is the spot size using G8 vs G2?

The size pot of G2 lens compare with G8 lens you can check on website of DTR,
SIZE of parallel beam laser is not depend on size of aixiz! It is only depend on Lens and fl of lens

 

[gazer101]

The size pot of G2 lens compare with G8 lens you can check on website of DTR,
SIZE of parallel beam laser is not depend on size of aixiz! It is only depend on Lens and fl of lens

I see, it gives half the divergence for twice the focused spot size

 

[Lifetime17]

Why do you want to see the dot at about 15?
You can check it for yourself by the way fit g8 for your nubm44 !

Hi,
To see the focusing distance compared to the amount of threads being used with the 12mm module. It would be nice to make a video of how it will work under normal conditions in a hand held unit. Thats why I asked about a simple test at 15FT and further out.
It just nice to see how it works through out the thread range. I think it would be better for your sales if folks see how efficient the 12mm module responds.

Rich

 

[RA_pierce]

Thats why I asked about a simple test at 15FT and further out.
It just nice to see how it works through out the thread range. I think it would be better for your sales if folks see how efficient the 12mm module responds.

The point thanhtung is making is that the performance of the lens does not change with the longer module.
His new module simply allows the G8 lenses to be used without modification.
If you have a NUBM44 diode and a G8 lens already, you can examine the divergence yourself... or check the tests done by others.