Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

FS: "Mosquito" Version 2 - All In One 1.2W+ 445nm Modules - 1667 mA

Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

oh I thought they were talking about making heatsinks for the modules in a flashlight. My bad.
 





Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Actually, I don't really know either. :p
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Woops :o

I guess I jumped to the conclusion that he wanted a driver heatsink too early...

my bad.

@Patoche91

Lots of members here can make you heatsinks for under 20 dollars...
 
Last edited:
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Helios said:
Where do you plan to buy small blanks of copper? The shop I buy my metal at only sells full bars and in copper they cost quite a pretty penny.
Click to expand...

LaZeRz said:
?? what?

You need a tiny piece of copper about 2x2cm and that will cost you under a dollar
Click to expand...

Yes, the problem is that my work there is no copper, they buy only if it's necessary (a copper bar of 2 meters and 30 mm in diameter can cost at least 150/200 euros), so only aluminum or brass. That's why I asked which is better between these two materials. :thinking:
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

aluminum for sure over brass. Most builds use aluminum and it works just fine.
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

some news on my mosquito? :D
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Arayan said:
some news on my mosquito? :D
Click to expand...

Hey Arayan,

Not sure I follow. News? You'll have Mosquito-news (the Mosquito arriving) for me. But were you waiting on me for something?

Cheers
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

I'm sorry for the insistence but yesterday I bought a module, and I did not know anything about shipping :( ... I knew that you had few time :D
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Arayan said:
I'm sorry for the insistence but yesterday I bought a module, and I did not know anything about shipping :( ... I knew that you had few time :D
Click to expand...

Oh, lol. You meant "news" as in confirmation about shipping.

Yes, your module shipped :)

I don't send PMs or emails when I've shipped packages off (unless someone has specifically requested that I let them know for some reason). I always tell people at the time of payment when their items will ship, but I don't typically remind them again after the fact. I've noticed that this is pretty common practice on the forum.

But yes, your module has shipped. Though I'm sure it will take quite a while more to reach you, as you only purchased it 2 days ago and it's going to Italy ;)
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

rhd said:
Oh, lol. You meant "news" as in confirmation about shipping.

Yes, your module shipped :)

I don't send PMs or emails when I've shipped packages off (unless someone has specifically requested that I let them know for some reason). I always tell people at the time of payment when their items will ship, but I don't typically remind them again after the fact. I've noticed that this is pretty common practice on the forum.

But yes, your module has shipped. Though I'm sure it will take quite a while more to reach you, as you only purchased it 2 days ago and it's going to Italy ;)
Click to expand...

yes yes I know, the question is because there were only a few hours before closing shipments :o

Thanks for all :)
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

@rhd- when should i expect mine to come? :)
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Hi Josh,

I'm in transit - and will be out of touch for the next week or so. It also means I don't have my shipping receipts close at reference. However, a general rule of thumb for this size of package to the US from Canada is 6 to 8 business days from time of shipping.

Cheers
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

Module well received and works very well ! :)

:thanks:
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

mine came in today- thanks :)
 
Re: FS: "Mosquito" All-In-One 445nm Modules - 1,760 mA - Ready to DIY with!

These are back and available again!

Also, I have a new configuration available, as well as proper paypal shopping cart buttons so that buyers who want multiple modules can order them without incurring any additional shipping costs.
 
You must log in or register to reply here.


Back
Top