Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Full Colour Driver Extension for the White Fusion kit






Re: Feeler: full colour driver extension for the White Fusion kit

jaycey said:
OK, I run the PHR @ 100mah (max @109mah), LOC @ 360mah (max 391mah).
The green I havn't a clue? Anyone know what to set the driver output at for a 50mw O Like module?

Lovely Stuff!
Click to expand...
I cant tell you what current you should choose. Measure how many mA it draws at its rated voltage and choose the nearest lower max current. I know it is common to find 0.5W pumps in 50mw modules and up, they should take up to 500mA.
 
Re: Feeler: full colour driver extension for the White Fusion kit

Just reading through the 7 colour laser threads, I think I will have to either get a lower power green module as I dont think the 50mw will go down to the 5-10mw thats suggested...or change the PHR for a 6x GGW.

Time to splash out on a 6x me thinks...he he he!


P.S. how do i measure the current draw at its rated voltage with my DMM? I use a single ultrafire 3.6v
 
Re: Feeler: full colour driver extension for the White Fusion kit

Set the negative lead on your dmm to COM and the positive lead to the 10A socket. Turn the knob to 10A DC.
Negative side of the battery to the negative side of the driver. Positive side of the battery to the positive lead on your dmm. Negative lead for the dmm to the module's case.
 
Re: Feeler: full colour driver extension for the White Fusion kit

Here is another teaser video. I totaly dig this driver! Sorry that my camera doesn't do that well in the dark. It also can't pick up enough contrast so there is actualy more colors to this rainbow effect than you will see in this video.




Edit: Actualy it looks like it just doesn't pick up 405nm so non of the violet comes through.
 
Last edited:
Re: Feeler: full colour driver extension for the White Fusion kit

Thanks for the information.
 
Last edited:
Re: Feeler: full colour driver extension for the White Fusion kit

I think the same.
 
Last edited:
Re: Feeler: full colour driver extension for the White Fusion kit

Read all in the first post.
 
Re: Feeler: full colour driver extension for the White Fusion kit

Sorry, I ask any stupid (top).

I need to tell R G V..mA with or not.
Tell me PM the to your convenience.
 
Last edited:
Re: Feeler: full colour driver extension for the White Fusion kit

A batch of boards are in production and should arrive soon, and I've gotten most of the components in the mail.

Still there are a few interested people who hasn't chosen any max currents, please do it asap :)
I'm also adding a few accessories like buttons and isolation pads in the first post which are necessary for the drivers. Let me know what you want.
 
Re: Feeler: full colour driver extension for the White Fusion kit

Updating --

I will need two (2) with the following maximums

R-391 G-449 V-350

Peace,
dave
 
Re: Feeler: full colour driver extension for the White Fusion kit

ill take one

but im not to sure what ma i want

im using 1x lpc diode 1x 6x diode and a 50mw+ green module ill send u a pm
 
Re: Feeler: full colour driver extension for the White Fusion kit

FML, please change mine to...R=391 g=449 v=183

cheers J
 
You must log in or register to reply here.


Back
Top