FS: Full Colour Driver Extension for the White Fusion kit

[FireMyLaser]

For the next batch I will make one or two new max current settings between 450 and 700mA, please post in this thread which new currents you wish to have, and I will try to include them in the list of max currents.

 

[TheGr8Revealing]

Awesome. Are you still looking for just one more purchase to start the next batch?

 

[Flaminpyro]

I have seen some green modules suck up 650-700mA so yes I would like to see a option for 700ma for the green driver, Thanks !

Peace All...

For the next batch I will make one or two new max current settings between 450 and 700mA, please post in this thread which new currents you wish to have, and I will try to include them in the list of max currents.

 

[FireMyLaser]

Ok, noted. I won't be able to please everybody so I will probably pick an average current setting based on your requests.

Btw those who have bought the driver before, how was the idle current for your green module(s), too high/low or just good as it is?

Awesome. Are you still looking for just one more purchase to start the next batch?

That's right.

 

[TheGr8Revealing]

Ok. I am in for 1 Full Color Driver Extension. I would like Red @ 391mA, Green @ 500-700mA, and Violet @ 391mA. Oh, and I would also like the 3pc insulation pads + bushings. As well as buttons. PM me for payment proceedings?

 

[FireMyLaser]

I added you to the list. Now we are up to 11 drivers, I think I will make a batch of 15 total. It will take a while before it's ready, maybe a few months. As usual, I will not take any payments until the driver has been made and tested.

 

[DjHeadie]

I added you to the list. Now we are up to 11 drivers, I think I will make a batch of 15 total. It will take a while before it's ready, maybe a few months. As usual, I will not take any payments until the driver has been made and tested.

so so excited.

 

[FireMyLaser]

BTW DjH, is this right: R391 G367 V449?

To me 367mA for the green vs. 499mA of violet doesn't add up at all.

 

[hydrogenman15]

Put me down for one of your drivers.

Red:391mA's
Green:265mA's
violet:208mA's

Insulation/bushings for regulators and wires.

--Hydro15

 

[Flaminpyro]

At least 600ma for the green !

The idel current was ok all of mine could have been less, when in black marker I can still see colors very faintly but I'm not complaining.

Ok, noted. I won't be able to please everybody so I will probably pick an average current setting based on your requests.

Btw those who have bought the driver before, how was the idle current for your green module(s), too high/low or just good as it is?


That's right.

 

[DjHeadie]

BTW DjH, is this right: R391 G367 V449?

To me 367mA for the green vs. 499mA of violet doesn't add up at all.

quite honestly i think that 499mA across the board would be perfect, ive been playing too much with the diodes ive had on hand and have decided to start fresh for every component on this build, and keep some of these weaker modules in hosts. when i had listed off those currents i had a weaker v diode that wasnt capable of putting out nearly the type of mW as most others'

sorry for the constant mind changing flamin, just let me know when they are ready, and payment info!

 

[FireMyLaser]

I'm slightly confused... do you want all to be 449mA?

Put me down for one of your drivers.

Red:391mA's
Green:265mA's
violet:208mA's

Insulation/bushings for regulators and wires.

--Hydro15

I added you to the list, but are you sure about just 265mA for the green?

 

[DjHeadie]

I'm slightly confused... do you want all to be 449mA?



I added you to the list, but are you sure about just 265mA for the green?

ok. sorry for ALL the confusion.

i devoted an hour or so to figuring out what the modules i have will require.

i would like my red at 350mA
the v i would like to be at 309mA
and the green i would like at 449, i have a few diodes and can alter this as i need to.

sorry again for the confusion, this is my final (hopefully) unless it doesnt make sense to you ...?

 

[FireMyLaser]

OK, updated. Bare in mind that there will be time (soon) when I collect all the parts, and by then I can no longer change your requests. So please make up your mind while you still can.

 

[hydrogenman15]

I added you to the list, but are you sure about just 265mA for the green?

Its strange right? I was measuring the output of my o-like 50mW green and the current it was drawing and it was only taking 256mA's.:thinking:
I think it could be the driver or something. I'll try it with a DDL circuit just to make sure.

****EDIT****
Just tested with a ddl driver with the DDL circuit at 250mA's and it put out 50mW's. So it should do just fine at a max of 265mA's.
--Hydro15

 

[Cheech]

Put me down for 1 driver with old max currents and buttons, pads, wires ect, I will DMM myself.
Thanks and awsome.