Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Dorcy Jr. Host, Labby Heatsink, Two laser Combine Block. Updated

Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also for sale is a dorcy jr. Host with custom heat sink for a 12x30 mm module or dtr module. The heat sink is 1" dia x 2" long, should make for a great duty cycle for a small pocket burner host. The host holds 2x CR123 batteries. This host has a positive battery contact for a super simple build. focus ring in front. If you have a module already built you can build this host into a laser in about 15min.

25.00 shipped

Thanks

82066A1A-CC11-4594-919A-4C79A428EFD4_zpsnnsqqrez.jpg

001002B5-19A2-4AFD-80E5-FE2F0E3225BE_zpstcd8pchh.jpg


-------------------------------------------------------------------------------------------------------
Labby style heatsink 2" Long x 1" Dia this will hold a full 12mm x 30mm module. flat spot on the bottom and two mounting screw holes located 1.5" apart, screw size 6/32. There is also a set screw on top to hold the module in.
16.00 shipped.
B0F78153-0C5E-4B17-91E0-CADFBE783C1D_zpsteud0smv.jpg

D8F8FE46-579F-4A0C-90F0-DDD2DF56C05B_zpskgknvwmn.jpg


=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~
 
Last edited:





Re: FS: Aluminum laser Combined Mounts For 12mm Modules

This is really cool. Will these line up perfectly using a combiner cube without any adjustment?
 
Re: FS: Aluminum laser Combined Mounts For 12mm Modules

All they need is one of my adjustable Micro Dichros :)

46046d1409797384-anyone-familiar-attiny13-programming-img_20140903_191951.jpg
 
Re: FS: Aluminum laser Combined Mounts For 12mm Modules

The holes are machine at the same height as each other, so they should be close assuming that the beans come out of the module at the same height. RHD looks like he has a pretty good set up for making fine adjustments.
 
Re: FS: Aluminum laser Combined Mounts For 12mm Modules

Ahh nice...like the o-like combiners, minus a) shipping from china and b) not holding 12mm modules. I think o-likes are for something like 16mm modules? Kinda useless.
Will you be offering these continuously? I would like to buy one at some point, but can't right now.
 
Re: FS: Aluminum laser Combined Mounts For 12mm Modules

Yeah I can always make one if somebody needed it.
 
Re: FS: Aluminum laser Combined Mounts For 12mm Modules

Price dropped^^^
 
Re: FS: Aluminum laser Combined Mounts For 12mm Modules

The first picture shows the dimensions. :D
 
Last edited:
Re: FS: Ehgemus Custom Hosts For Sale Thread. Updated 9/30/14

Bump, everything updated 9-30-14
 
Re: FS: Ehgemus Custom Hosts For Sale Thread. Updated 9/30/14

Interested in the titanium host and in two of the module holder things. ;) Sending PM momentarily.
 
Re: FS: Ehgemus Custom Hosts And Heatsinks For Sale Thread. Updated 10-9-14

New host added^^^^
 
Re: FS: Ehgemus Custom Hosts And Heatsinks For Sale Thread. Updated 10-9-14

What are the dimensions of the new host?
 
Re: FS: Ehgemus Custom Hosts And Heatsinks For Sale Thread. Updated 10-9-14

The new host on top is 6" long 1" dia
 
Re: FS: Ehgemus Custom Hosts And Heatsinks For Sale Thread. Updated 10-9-14

^^^bump^^^
 
Re: FS: Ehgemus Custom Hosts And Heatsinks For Sale Updated 10-16-14

Some prices dropped.^^^
 
You must log in or register to reply here.


Back
Top