Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

FS: DIY Green Kit! Host, Heatsink - Easy Assembly!

Re: FS: DIY Green Kit! Host, Heatsink - Easy Assem

eggman3678 said:
Just got my module in for my DIY greenie!! Very nice kit!, I got the 100mw module and used some head sync compound when I put it all together.
So far I have run it for about 5 minutes non stop without any heat issues.
I have bought another kit to assemble for a friend they were so impressed with it.
Perfect solution for a good price..
Thanks again Jay!
Click to expand...

Your Welcome!

Thanks for posting back... and with pictures too! :)
Jay
 





Heat sync? That bring up some interesting thoughts. Should be heat sink. BTW, I think the B/S/T threads of interest link to this thread is not working, b/c I tried a few times and it just took me to the main homepage.
 
Yeah... I'm sure styropyro is planning on fixing the links in his BST 'threads of interest'.

The links have to be re-directed to the new forum...
Jay
 
Finally got my laser together and functional. It is AWESOME...this is my first laser and i know now it won't be my last. It's just amazing the reaction i get from friends. Thanks again Jay...awesome build.
 
Cl3aN3r, I finally got the green Tritium. So your DIY Green Kit with Tritium marker was shipped today. (Wednesday)

Tritium3.jpg


Hope to see some comments from you after you do your build! :thanks:
Jay
 
Last edited:
Hello Jayrob,

Just wondering with the "Bypass the Switch" part.. what does that do?

i am a noobie at putting together lasers.

i'm going to purchase a 40~50mW module from Susie.

ordered a green laser from DX, customs got it.. :( wasted 50bux. so this should be the "legal" way to get them into australia.

Thanks, From Cain.


EDIT - SORRY!, Now i know what this means!, for the switch at the back of the host! SILLY ME!.

Will most likely buying this kit sometime Jayrob!
 
Last edited:
FlightLevel350 said:
Heat sync? That bring up some interesting thoughts. Should be heat sink. BTW, I think the B/S/T threads of interest link to this thread is not working, b/c I tried a few times and it just took me to the main homepage.
Click to expand...

Thanks for pointing that out Flight, I'm sure no one had any clue what I meant..
I'll be sure and use heat SINK from now on..
 
Just received my kit from Jayrob. This is my first laser, so I am a noob. The laser was easy to build. I order the module from o-like a 150mw. I also put the Green Tritium marker in the host. The laser works very well. Jay responded to all my questions and was patient with me being a noob. Overall I will give it a 9 out of 10. I am very pleased with the laser. I would recommend this setup
 
Congrats man, on your success. Green really is bright and at higher power as well.
 
Cl3aN3r said:
Just received my kit from Jayrob. This is my first laser, so I am a noob. The laser was easy to build. I order the module from o-like a 150mw. I also put the Green Tritium marker in the host. The laser works very well. Jay responded to all my questions and was patient with me being a noob. Overall I will give it a 9 out of 10. I am very pleased with the laser. I would recommend this setup
Click to expand...

I'm glad you like the kit! And thanks for posting back!

:thanks:
Jay
 
hey Jay,

I'm wonder if its possible to make the front piece a bit shorter, so that the glass lens can be fitted in.

that way we can have a nice aperture as well as glass lens for protection!
 
Yes, I could do that, but then it would not work without the glass lens...

Also, having a small aperture is only to reduce the amount of possible dust. It has no effect on the beam or dot. However the glass does have an effect on the beam and dot. It also gives some reflection that you would notice in the dark.

That's why I recommend the custom front piece. The glass option was just mentioned when somebody was complaining about the price of the kit. And it gave a cheaper option...

As an alternative dust cap idea, I have found that just gluing an AixiZ focus ring onto the front with some JB Weld or some thermal adhesive makes a nice way to use the small dust caps that we are used to.

See pictures of this idea in my Mini Mag green kit thread:
http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?p=528182
Jay
 
You must log in or register to reply here.


Back
Top