Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Fs: CUSTOM LASER HOSTS, NEW HOSTS ADDED TODAY 1/10/16

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
THERE IS {0} HOSTS READY TO SHIP. IF YOU SEE SOMETHING YOU LIKE THAT IS SOLD PLEASE PM ME. THANKS
///::;;:/::;:;;/::;::;(:)-/:;---/:;;;;)(;--/:;()(;;://::;((;::///:;((())(;/--/:;((;://:;;(((;:/-/:;(((((

This host holds 1 18650 or 2 18350 batteries and a full size 12 x 30 mm module or a prebuilt DTR module. The host has a focus ring in front clicky switching back. The host is prewired and ready to build and you should be able to complete this build in about 10 minutes. Host is 1" diameter and 6.5" thanks for looking.

SOLD 75.00 shipped in the US.
International buyers please add 7.00 for shipping.






*************************************************************************
This host holds 1x18650 or 2x18350 batteries and a 12x30mm module. Host is pre-wired for a super fast build that should only take 10min with a pre-built module. Focus ring in front and clicky switch in back that is covered with a metal cap. Host is 7" long. Thanks for looking

SOLD 120.00 shipped.
International buyers please add 8.00 for shipping.










Host before the finale profile cuts where made. Hard to believe rite?


€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€




++++++++++++++++++++++++++++++++++++++++++++++++++++++++

These two hosts holds 2x14500 or 2 AA batteries and a full 12x30mm module. The host is pre wired and ready to build. Host is 7" long. 7/8" dia heatsink and 3/4" dia in the handle area.

SOLD 44.00 or 80.00 for both shipped
International buyers add 7.00 for shipping










**************************************************************************

This host holds a full 12x30mm module or pre-built DTR module. Batteries, 1x18650 or 2x18350. Host has a clicky switch in back and a focus ring in front. Host is pre-wired for a fast 10min build. Host is 6.5" long and the heatsink dia is 1".

SOLD 60.00 shipped
International buyers please add 8.00 for shipping, Thanks












~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This host holds a full 12x30mm module. Holds 1x18650 battery or 2x18350 batteries. pre wired and ready to build. Clicky switch in back, focus ring in front. Host is 5-3/4" long. Nice little pocket size host.


SOLD 62.00 with free shipping in the US.
International buyers add 8.00 shipping.














==================================================

This host holds 1x 18650 or 2x18350 batteries and a full 12x30mm module or DTR ready built module. The host is pre wired. Build should take about 10min if your module is ready to go. Host has a clicky switch in back and a Focus ring in front. The host is 6.5" long.

SOLD 67.00 shipped in the US.
International buyers please add 8.00 for shipping.











========================================================

This host holds 1x 18650 battery and a full 12x30mm module or DTR ready built module. The host is pre wired. Build should take about 10min if your module is ready to go. Host has a light up side momentary switch. Focus ring in front. The host is 7.5" long.

SOLD 85.00 shipped in the US.
International buyers add 10.00 for shipping.









++++++++++++++++++++++++++++++++++++++++++++++++++++++++

This host holds 1x 18650 battery and a full 12x30mm module or DTR ready built module. The host is pre wired. Build should take about 10min if your module is ready to go. Host has a light up side momentary switch. Focus ring in front. The host is 7.5" long.

SOLD. 87.00 shipped in the US.
international buyers add 8.00 for shipping.



















~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This host has a copper wire wrapped grip. The host holds 1x18650 battery or 2x18350 batteries. The host is 6.5" long and has a 1.5" dia heatsink, should have a pretty good duty cycle. The host is pre wired and ready to slide a 12x30mm module in. Build should take about 10min if your module is built and ready to go. The switch on the side is momentary and there is a clicky switch in back for added safety. The focus ring in front covers the set screw that holds the module in. Thanks for looking.

SOLD80.00 shipped in the U.S.
International buyers please add 11.00 for shipping. Thanks














¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥


Up for sale is a nice pocket-size pen style host that holds 2x 18350 batteries or 1x 18650 battery and a full 12x30mm module. The host is 5-3/4" long and 7/8" dia. The host is pre-wired for a fast 10 min build. The host is polished. Clicky switch in the back and a focus ring in front that cover the set screw that holds the module in the heatsink.

SOLD52.00 shipped
International buyer add 7.00 for shipping.
Thanks











+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

This host holds 1x18650 battery or 2x18350 batteries. The host is 6.5" long and has a 1.5" hex heatsink, should have a pretty good duty cycle. The host is pre wired and ready to slide a 12x30mm module in. Build should take about 10min if your module is built and ready to go. Clicky switch in back. The front is a focus ring.

SOLD75.00 shipped.
International buyers please add 10.00 for shipping.
Thanks for looking.










==========================================================

This host holds 2 18650 batteries and a 12x30mm module. The host is 8-3/4" long, clicky switch in back and a focus ring in front that covers the set screw that holds the module in. The host will be pre wired and ready to build. Build should take about 10min.

SOLD75.00 shipped in the U.S.
International buyers please add 12.00

Thanks for looking.











~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This host holds a 12x30mm module or a prebuilt DTR module. The switch in the side is a momentary switch. This host will hold 1 18650 battery or 2 18350 batteries. The focus ring is a clear acrylic and will look really cool when the laser is on.

SOLD60.00 shipped in the U.S.
International buyer please add 11.00 for shipping.












++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

SOLDUp for sale is a very nice custom host that holds 1-18650 battery or 2-18350 batteries. The front brass piece is a focus ring and a metal latching switch in the back. The host will come prewired ready to drop your module in. The host is 6 5/8 long and 1 inch diameter. Thanks for looking.

SOLD110.00shipping it the U.S.
International buyers please 12.00 for shipping.















=========================================================

This host holds 1x 18650 or 2x 18350 batteries and a full 12x30mm module. Focus ring in front and Clicky switch in back. Host is prewired and ready to build.

SOLD55.00 shipped in the U.S.
International buyers please pm me.










%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

These 6 custom laser hosts hold 1x18650 or 2x18350 batteries. These hosts are 5.5" long. 7/8" Dia. The hosts are prewired with a negative and positive wire coming out for a super easy build and holds a 12x30mm module or DTR ready built module. Clicky switch in back.

52.00 with free shipping in the US
International shipping please PM me.

Please refer to the host as 1-6 for left to right in the first picture.
Thanks for looking.

1. SOLD
2.
3.
4. SOLD
5.SOLD
6.SOLD








++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

SOLDThis host hold 2 18650 batteries and a full 12x30mm module. This host is a good fit for one of the new 6W diodes, with the oversized heatsink and a place to heatsink the driver directly to the host body.
Host is 10-3/4" long Heatsink is 1-1/4" Dia a momentary side switch and a clicky switch in the back tail cap for added safety.
Focus ring in front. The white paint is powder coat. Thanks for looking.

SOLD130.00 shipped in the U.S.
International buyers please add 12.00 for shipping.










[][][][][]][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][][

SOLDThis is Custom stainless steel laser host and holds 1x14500 battery. This host is 5" long and 3/4" Dia. The host is prewired with a negative and positive wire coming out for a super easy build and holds a 12x30mm module or DTR ready built module. Focus ring in front, clicky switch in back.

100% stainless steel.

SOLD60.00 with free shipping in the US
International shipping please PM me.

Thanks for looking.







%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


This Custom laser host holds 2x18650batteries. The host is 9.25" long. The host is prewired with a negative and positive wire coming out for a super easy build and holds a 12x30mm module or DTR ready built module. Focus ring in front, clicky switch in back.

SOLD65.00 with free shipping in the US
International shipping please PM me.

Thanks for looking.









**************************************************************************

This Custom laser host that holds 1x18350 only. The host 5.75 inches long, 1-1/8" diameter heatsink. The host is prewired with a negative and positive wire coming out for a super easy build. The switch is momentary. Focus ring in front.
The carbon fiber on the handle is a vinyl type material but has a nice texture to it l, feels like real carbon fiber.

SOLD62.00 with free shipping in the US
International shipping please PM me.

Thanks for looking and please give me your feedback on the carbon fiber wrapped handle.







#################################################
If you are interested in a host that is already sold please send me a PM and I can build you one just like it. Thanks for looking

SOLDThis Custom laser host that holds 1x18650 or 2x18350 batteries. The hosts are 6 inches long, The 1" diameter. The host are prewired with a negative and positive wire coming out for a super easy build. The switch is momentary. Focus ring in front.
The carbon fiber on the handle is a vinyl type material but has a nice texture to it and almost feels like carbon fiber.

SOLD60.00 with free shipping in the US
International shipping please PM me.

Thanks for looking and please give me your feedback on the carbon fiber wrapped handle.






~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

#3 Host still for sale.These 5 Custom hosts holds 1x18650 or 2x18350 batteries. The hosts are 6" long, 1" diameter. The hosts are prewired with a negative and positive wire coming out for a super easy build. Clicky switch in back. Nothing more to do to the host itself, ready to build.

70.00 with free shipping in the US
International shipping please PM me.

Please refer to the hosts as 1-5 from left to right in the first picture. Thanks

1. SOLD
2. SOLD
3. SOLD
4. SOLD
5. SOLD











~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

For sale is a custom laser host that holds 1x18650 or 2x18350 batteries. The host is 5-3/4 inches long, The heat sink is 1-1/8" diameter. Host is prewired with a negative and positive wire coming out for a super easy building. Clicky switch in back Nothing more to do to the host itself, ready to build.

SOLD59.00 with free shipping in the US
International shipping please PM me.
Thanks for looking







=======================================================
 
Last edited:

Alaskan

Well-known member
LPF Site Supporter
Joined
Jan 29, 2014
Messages
10,792
Points
113
Re: Fs: 2 custom laser host

I will take the long 4X battery one. Edit: The ability to use 1.5V AA batteries is why I bought it, the other unit is more appealing to the eye, but only holds one battery, I already have one that will do that, otherwise I'd snap it up, it's very nice. - This will probably be used for one of my IR diodes.

One of the nice things about LaserGlow hosts were their ability to use normal AA, C or D sized Alkaline battery cells. I bet if you build some which can use four C and D cells, a few of those would sell too. I don't know the market demand for those, but for myself, I don't always like having to use rechargeable batteries for things I don't drain down so quickly. Maybe Alkaline batteries can't supply the needed current for some of the higher power laser diodes and that would cause such hosts to be less in demand, but for moderate to low powered lasers I think they would be better hosts.
 
Last edited:

DKlaser

Member
Joined
Nov 16, 2010
Messages
170
Points
18
Re: Fs: 2 custom laser host

I will take the first host. If it will accept one of DTR modules for the 9mm diode with driver I will take it for sure and am ready to pay now. Send me a PM with payment instructions.
 
Last edited:

ZeroDefect

New member
Joined
Mar 30, 2015
Messages
4
Points
0
Re: Fs: 2 custom laser host

I see interest for the first host, but it's not marked "SOLD". If you still have it I'll take it.
 

SteveT

Member
Joined
Jan 20, 2015
Messages
252
Points
18
Re: Fs: 2 custom laser host

Guys snap these hosts up, (or more like them) Ehgemus is a legend!
 
Last edited:

Willjoe21

Member
Joined
Mar 25, 2015
Messages
103
Points
18
Re: Fs: NEW DUEL DIODE CUSTOM LASER HOST ADDED. 2x18650

I want the dual host!
 

Masterofcamm

New member
Joined
Apr 7, 2015
Messages
5
Points
0
Re: Fs: NEW DUEL DIODE CUSTOM LASER HOST ADDED. 2x18650

I love the second host. If you have more in future please pm me
 

Ehgemus

New member
Joined
Feb 28, 2009
Messages
1,385
Points
0
Re: Fs: NEW DUEL DIODE CUSTOM LASER HOST ADDED. 2x18650

I went ahead and built one more of the second host.^^^^^
 




Top