Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS:Buck boost fully adjustable driver, 22$

AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
This is for the drivers mentioned here
http://laserpointerforums.com/f67/10x11-4mm-buck-boost-driver-miniaturized-version-77130.html
It's designed by LaserLuke.

You can run your 9mm to the max with just 1 cell!!! ( make sure it's not a "fire" 18650 IMR AW's or good quality cells will work with this.
You can also run the Mitsubishi off 1 cell.

These are POT adjustable & you are responsible for setting the current.
These are 10mm x 11.4mm so they fit in Aixiz modules.
Adjustable from 100mA-2000mA.
Continuous ground :D

Hopefully there is some interest :)

If we can get to 70 peices total I can get them made 19$ each... That makes it less than building it yourself for those of you wanting to make it yourself

Orders will be accepted starting Friday September 7th :wave: let's try & get that 70 so we can get the better price also :D
 
Last edited:





Plenty of interest, how much money, how long on delivery, how do they scope, is there reverse protection?????? these look good man it's just seems like and Apple product let the customers do the R&D.
 
AnthoT said:
This is for the drivers mentioned here
http://laserpointerforums.com/f67/10x11-4mm-buck-boost-driver-miniaturized-version-77130.html
It's designed by LaserLuke.

You can run your 9mm to the max with just 1 cell!!! ( make sure it's not a "fire" 18650 IMR AW's or good quality cells will work with this.
You can also run the Mitsubishi off 1 cell.

These are POT adjustable & you are responsible for setting the current.
These are 10mm x 11.4mm so they fit in Aixiz modules.
Adjustable from 100mA-2000mA.

Hopefully there is some interest :)
Click to expand...

Where is a pic of one?:D
 
No pics yet sorry :(

It depends on the amount of orders but will likely be around a week wait before shipping. Really depends when the PCB's arrive to me.


I may also get them produced in china which would be just a bit longer

EDIT: those that want some now PM me.
 
Last edited:
gillza said:
I am very sorry to intrude here. I would like to sincerely wish you good luck with sales Anthot.

That said however let me point to this all those who are wishing to support laserluke.

http://laserpointerforums.com/f67/1...miniaturized-version-77130-3.html#post1110181
Click to expand...

this isn't the open source one. that was the 17mm version. they are different. I explained it in the last thread.
Now before this thread goes completely off track let's get back on track...
If we can get to 70 peices total I can get them made 19$ each... That makes it less than building it yourself for those of you wanting to make it yourself
 
Last edited:
Awesome. I would get one right now but i dont think it is a good choice for my S06j. Im just going to wait for my 9mm build :)
 
The Baron said:
Awesome. I would get one right now but i dont think it is a good choice for my S06j. Im just going to wait for my 9mm build :)
Click to expand...

Yeah it might have trouble with the high voltage at 500mA.

It is perfect for your 9mm though :D
 
I'm building one myself to test to be sure first :)

But after that I'll bump this thread & they will be available
 
Will they run the sensitive diodes? 405 and single mode osrams?
 
You must log in or register to reply here.


Back
Top