- Joined
- Jul 4, 2012
- Messages
- 2,832
- Points
- 63
Simple enough thread 
I have a few of these for sale. 3 rectangular adjust and 3 circular adjust (16.8mm). Be sure you have plenty of room in your pill for the round boards, I found they don't quite fit in the standard C6 brass ring setup. Its close though, it catches on the smallest part of the inductor (right on the corner). May be possible to sand it down, but I haven't tried (or file a smal notch in the side of the pill). The rectangular boards are somewhere around 12.6mm X 9mm- plenty small to fit in a 12mm hole. All the boards have a range of approximately 1.4-2.6A (they each differ a bit, so you may get one that goes from 1.46-2.65A, etc).
These should be heatsinked from 1.8A+.
(not the circular boards in this pic)
(these are what I actually have)
Input Voltage: 1.2*Vin - 16V
Output Voltage: <1V - 9V
output: adjustable 1.4-2.5A (like previously mentioned, may vary slightly per board)
rectangular: 5 left
round (new design, like pictured in the 2nd pic): 1 left
Price: $17 per +2$ shipped to the US. If you want priority (2 day shipping) it will be 5$.
Thanks for looking
I have a few of these for sale. 3 rectangular adjust and 3 circular adjust (16.8mm). Be sure you have plenty of room in your pill for the round boards, I found they don't quite fit in the standard C6 brass ring setup. Its close though, it catches on the smallest part of the inductor (right on the corner). May be possible to sand it down, but I haven't tried (or file a smal notch in the side of the pill). The rectangular boards are somewhere around 12.6mm X 9mm- plenty small to fit in a 12mm hole. All the boards have a range of approximately 1.4-2.6A (they each differ a bit, so you may get one that goes from 1.46-2.65A, etc). These should be heatsinked from 1.8A+.
(not the circular boards in this pic)
(these are what I actually have)
Input Voltage: 1.2*Vin - 16V
Output Voltage: <1V - 9V
output: adjustable 1.4-2.5A (like previously mentioned, may vary slightly per board)
rectangular: 5 left
round (new design, like pictured in the 2nd pic): 1 left
Price: $17 per +2$ shipped to the US. If you want priority (2 day shipping) it will be 5$.
Thanks for looking
Last edited:
