Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Aurora C6 Kits!

Status
Not open for further replies.
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Please purchase items at Mohgasm.com

I've got Aurora C6 Host/Heatsink kits available now! The aurora C6 flashlight is probably the most used for lasers. It can accommodate 1x18650 or 2x16340 (CR123) batteries making it ideal for both linear and boost drivers.
​
 

Attachments

  • aurorac6kits.jpg
    aurorac6kits.jpg
    89.7 KB · Views: 1,970
Last edited:
  • Like
Reactions: ARG





Hey i am interested for 3 ''just add a diode kits''. But i have a C6 which has a problem on the tailcap when it is fully screwed it doesnt work. Is this problem fixed ? What are the available mA options ?
 
Last edited:
I remember something similar happening to a C6 of my own.
IIRC it was because something was loose in the tail cap.
Everything in the tailcap is held into place by a threaded ring. It was an easy fix, but i can't recall the exact problem off the top of my head. I'll check it out again and get back to you.
 
So to fix the problem on my C6 i have to put something in those holes and screw it ?
 
yes tighten it down.
I remember now that there is a PCB with a solder ring that is pressed against that retainer ring. When you screw the cap on, it depresses that spring and just pushes that PCB away from the ring and loses it's connection. But tightening the ring it will keep the PCB from moving when the spring is pushed down.
 
Thanks man, i fixed it !
When will you release the ''Just add a diode kit'' ??
 
Probably sometime today. I've got to get all these packages sent out and caught up on everything first.
 
Keeping track of everything is a pain when i give so many different options.

I might do away with the "basic kit" and only sell them as the just add diode kits and use a fixed current, like 1.6A for all of them.

My lathe also took a giant shit today. I had to order a new control box assembly for it. So it's dead in the water until i get the replacement parts in the mail, i'm hoping for mon. or teusday.

That means I don't have any way for making the focus adapters
 
Last edited:
oh i was thinking of doing a 405nm build or something. maybe set custom current for an extra charge;) and also what does the focus adapter look like?
 
just out of curiosity,m what makes this host so popular?
there are at least 3 forum members selling these now
or maybe my host tastes are just different...
 
no idea.
Personally, i like the stainless steel ones. Like the SH-032.


I just go with wht's popular.
 
"just add diode" kits now available. Be sure to re-read the descriptions before buying.
 
Can you hold 3 ''just a diode'' kits for me please. Will pay later.
 
Sorry man. I'm strictly first come, first serve.
It got too complicated when i had 10 different people having me hold stuff for them. That's why i use the paypal links now
 
Status
Not open for further replies.





Back
Top