Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: 445nm SAIK 1.5W/1.7W **$240**

This is a very good, trusted seller Here EMPTheodosius.

For him to even post this sale means the laser is in full working order. Apparently you didn't watch the lpm video of it working, and doing 1.5/1.7W?
 





jakeGT said:
This is a very good, trusted seller Here EMPTheodosius.

For him to even post this sale means the laser is in full working order. Apparently you didn't watch the lpm video of it working, and doing 1.5/1.7W?
Click to expand...

Thanks Jake.

Yes EMPTheodosius, it is in full working order. Ill send a PM and we can discuss further via PMs.
 
what are dual flexdrives exactly? I am very new to this scene. I found this forum and candlepower in the past few weeks and have been trying to learn. I recently purchased a 2D maglite XM-L mod from Jayrob and saw a matching 2D laser he also produces and am thinking about purchasing that as well but do not understand many of the features and specs.
 
I must say, this is a beautiful build and a elegant and compact host. I am using the 32600 battery with it but this is not quite a perfect fit since the protective wrapping had to be removed. Although the paint on the interior is enough to insulate the battery, I partially re-covered the battery with scotch tape for a little extra protection.

My question is then, does the 26650 have the same length as the 32600 and will it be a proper fit for this host? I have a little concern about the batteries with proper insulation since I run the risk of having the laser turn on when I don't want it to; it already turns on whenever I screw on the end cap.

Secondly, the lens seems a little loose. Would plumbing tape suffice to tighten the fit?
 
Lens, thread(Teflon tape) yes, use 1 and 1/2 wraps too steady the lens in place

26650 battery, a little easier fit, never tried the 32600, but a 26650 works fine.
 
EmpTheodosius said:
I must say, this is a beautiful build and a elegant and compact host. I am using the 32600 battery with it but this is not quite a perfect fit since the protective wrapping had to be removed. Although the paint on the interior is enough to insulate the battery, I partially re-covered the battery with scotch tape for a little extra protection.

My question is then, does the 26650 have the same length as the 32600 and will it be a proper fit for this host? I have a little concern about the batteries with proper insulation since I run the risk of having the laser turn on when I don't want it to; it already turns on whenever I screw on the end cap.

Secondly, the lens seems a little loose. Would plumbing tape suffice to tighten the fit?
Click to expand...

Yes for the lens 1.5 wraps of teflon tape does the trick as jake mentioned. The 32600s are the perfect fit for the host. The 26650s will fit too but the 32600s are better.

A 26650 battery is 26mm in diameter and 65mm in length.
A 32600 battery is 32mm in diameter and 60mm in length.

Here are a couple pics.













 
Thanks for the pictures. I suppose I will just have to try the 26650. The 32600 that I have (ultrafire brand) is just slightly too wide in diameter to fit but without protective plastic coating, fits just fine.
 
There is a ultrafire 32600? Where did you get it may I ask? Go to kaidomain for a 32600, it'll fit perfectly
 
For better battery fitting you can also use tape to make the batt diameter bigger.
 
You must log in or register to reply here.


Back
Top