FS:445nm Modules (CLOSED)

[daguin]

There doesn't seem to be too much interest here. Imma close this and figure out something else to do with them.

I put together three TWO 445nm modules. They have the diode from the XJ-A130. They have the Groove2 driver. They are putting out 400mW with the 405-G-1 lens. They will ship with the stock acrylic lens to protect the diode. You will NEED to get either a 405-G-1 lens or an AixiZ 405 glass lens.

These are made to be installed in your finished project. The Groove2 is a linear driver. You will need to power these with 7.2V-12V. You will also have to provide significant heat sinking for them.

They are $120, shipped in the US

SOLD This laser has the 445nm diode from an XJ-A140. It has a V5 flexdrive. The driver is set to 500mA. It is putting out 500mW with the 405-G-1 lens It will ship with the acrylic lens to protect the diode, but you will need a 405-G-1 or an AixiZ glass lens for it.

The MXDL uses three primary (standard) AAA batteries. The MXDL has the massive Jayrob heat sink in it.

For this last MXDL/Jayrob host I will stay with the old school price. It will ship in the US for $190.

While I have the thread open, I also have four three 250mW red burning modules available for $35 each

Peace,
dave

 

[ShamanJuice]

Re: FS:445nm Modules & a Laser

if I payed $250 could you possibly install the 405 G1 lens?

 

[jayrob]

Re: FS:445nm Modules & a Laser

Great deals you have there Dave!

In case anybody wants a 3405 host/heatsink combo for those modules, I have a few on hand.

They will work good for those Groove2/445 modules using 3 X 10440 batteries...

 

[daguin]

Re: FS:445nm Modules & a Laser

if I payed $250 could you possibly install the 405 G1 lens?

Sure

Peace,
dave

 

[ShamanJuice]

Re: FS:445nm Modules & a Laser

well if you manage to hold off this deal till next friday consider it sold. unless someone buys it before me which will undoubtably happen in less than 24 hours I'm assuming. great deal though. love the host.:beer:

 

[hakzaw1]

Re: FS:445nm Modules & a Laser

Both Dave and Jay always have the nicest stuff at 'buddy' prices-kudos to you both.

 

[DjHeadie]

Re: FS:445nm Modules & a Laser

wow dave. seriously. if i wasnt neck deep in projects atm id be putting a kid through college with the kind of funds id be sending you.



*** bites fingers and goes to cancel arctic order***

 

[Tech_Junkie]

Re: FS:445nm Modules & a Laser

Kind of early to be selling completed 445nm lasers, no?

 

[hakzaw1]

Re: FS:445nm Modules & a Laser

Kind of early to be selling completed 445nm lasers, no?

not if you are in a money bind-

Ca. time is hours earlier than East Coast too---lol:crackup:

 

[Tech_Junkie]

Re: FS:445nm Modules & a Laser

Considering all the heat Casio is taking, a huge publicity storm going on, and the US government involvement in the selling of completed 445nm lasers, I wouldn't bring focus to this forum, or to myself till the heat died down some. Its kind of like flying a huge blue flag saying "Here I am!". But thats just me.

 

[daguin]

Re: FS:445nm Modules & a Laser

Kind of early to be selling completed 445nm lasers, no?

Not.

Peace,
dave

 

[daguin]

Re: FS:445nm Modules & a Laser

Two 445nm modules left

Peace,
dave

 

[hakzaw1]

Re: FS:445nm Modules & a Laser

C'Mon guys-

Expert assemblage

see the truebluz- the day you get it and crazy- fast shipping to the US and no burnt fingers. NO BRAINER....why would you want to wait on a maybe deal??

snoozers are loozers

 

[Ash]

Re: FS:445nm Modules & a Laser

I'll take one of the modules.
PM sent
Paypal sent

 

[daguin]

Re: FS:445nm Modules & a Laser

Just a bump

Peace,
dave

 

[agravlin]

Re: FS:445nm Modules & a Laser

Holy crap, is that retro laser really 5 Watts? It says "5W"...

Also, these red burning lasers. Did you build them? Any chance you could post pictures?