Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: 3 Laser Projectors (Cheap)

KGB_Productions

KGB_Productions

0
Joined
Dec 1, 2008
Messages
878
Points
28
AS OF NOW THIS IS MAINLY A FEELER: IF I CANT SELL ALL 3 IT MAY NOT BE WORTH IT TO ME TO SELL ANY OF THESE BUT FEEL FREE TO PM ME FOR MORE PICS OR WITH ANY QUESTIONS.
​

I'm trying to raise money to purchase a 1.2W RGY system so I am selling the 3 scanners that I currently have. Cheap is a relative word but these seem cheap to me. These are not professional units but work fine and have served me well. I only need cash now (sry no trades) and If I sell everything for its listed price I am still short on cash for the 1.2WRGY so these prices are pretty much set.
​

-----------------------------------------------------------------------



Up first is my favorite, Its a BLUE 488nm 250mw (rated) ~35mw actual Argon laser scanner system 12k ILDA, DMX, Auto modes . Ready to go out of the box. Need to get $400 + Shipping
Its a Uniphase 2202-35LL, LL is the optics designator and means a custom part in this case FYI.
This laser starts perfect every time.
This laser has no AOM so it is constantly on (no blanking)

Here is the ILDA test pattern at 12k-remember this is only 12k + a soundcard dac running it so you could easily get better results-<-CLICK

This argon has a broken photocell so when it starts is jumps to ~full power(8A) and stays there (not that this was a problem for me :eg: )

This scanner comes with everything in this picture, including a LARGE pelican case to keep everything safe.
box.jpg


Remember 12k is NOT for graphics but for the hell of it here is a logo.
IMG_1654.jpg


IMG_1411.jpg



-----------------------------------------------------------------------




Up next is my RGVP scanner. This has 2x 650nm 80mw modules, a 50mw 532nm module, and a PHR running at ~100ma.
The green module has a weird lens issue but It is super easy to fix if the problem ever pops up, no tools required.
The "P" in RGVP was supposed to be pink but the BR and RED beams dont actually mix, they just both come out of the same aperture.
The BR diodes driver is powered off of 1 or 2 9v batteries that attach to the rear of the laser.
I really need to get $250 for this one + SHIPPING.
112329968_o.jpg






-----------------------------------------------------------------------


Lastly I have my Current ?300mw? RGY. I don't have a power meter but this one was advertised as 200mw 650nm + 100mw 532nm 10k.<-I doubt the 650 is running at 200mw.
When I got this I quickly realized that the colors were way off so I had to turn down the green to get it to match and get a good golden yellow color. The sound mode on this unit sucks(to me) but it has some cool DMX patterns. NO ILDA but comes with a case:( I need to get $300 off this + shipping.

8848678_tp.jpg

IMG_1683.jpg





--------------------------------------------------------------
I will put more pics up later as I go through my computers and find them.

This video is all 3 scanners running in my room with the exception of the PHR on the RGVP. Enjoy.



And this last video is just the Argon and the RGY.
NOTE THAT THE SCANNERS RUNNING ON THE ARGON IN THIS VIDEO ARE NOT THE 12K BUT SHITTY MICRO STEP MOTORS. YOU GET THE GOOD SCANNERS NOT THE CHEAP ONES IN THIS VIDEO.​







 
Last edited:





I LOVE that argon laser. I can't afford anything atm though, but I would jump over these if I had the money :) I hope you sell all of the 3 projectors to raise your budget :)
 
The argon is BY FAR my favorite and remember that you can always make a controller to run it in current mode to get EVEN MORE POWER 50mw maybe 75mw :) but I'm not the guy to ask how or else I would have already done it.

I'm posting this here first but in a few days I'm going to put it on PL and then if that doesn't work its going on ebay(for more than I would sell it here)


Here is more info on the argon: http://laserpointerforums.com/f43/argon-questions-38678.html
 
KGB_Productions said:
The argon is BY FAR my favorite and remember that you can always make a controller to run it in current mode to get EVEN MORE POWER 50mw maybe 75mw :) but I'm not the guy to ask how or else I would have already done it.

I'm posting this here first but in a few days I'm going to put it on PL and then if that doesn't work its going on ebay(for more than I would sell it here)


Here is more info on the argon: http://laserpointerforums.com/f43/argon-questions-38678.html
Click to expand...

Is the argon running in idle mode then with just a jumper?
 
Light mode, but the photocell cant "see" the beam so it jacks up the current automatically to 8A and stays there.


EDIT:

Forgot to mention that the RGY comes with a case. Check the first post for a pic.
 
Can you give me so more pics and info for the rgvp scanner? like how is it powered? whats the problem with the green module?
 
More pics tomorrow, Im at work until 11pm tonight but I can get some tomorrow.

As for the green module, I'm pretty sure its the ?focusing lens b/c every once and awhile when I turn it on the divergence sucks but if I tilt the laser forward and give it a little shake everything comes back to perfect. also In the video of the RGVP the BR looks super bright, it doesn't look like that in "real life" My cellphone just picks it up better than my other camera.

I will take pics of the inside tomorrow 4 ya
 
Hey can you get me more pics of the rgvp and rgy? and how are they powered? These would be really cool for my frat house...
 
You must log in or register to reply here.


Back
Top