DTR's Laser Shop - Open Thread

[paul1598419]

Welcome back Jordan. I'm glad your health has improved. Take care.

 

[DTR]

Welcome back Jordan. I'm glad your health has improved. Take care.

Thanks Paul. Good to see you as well.

 

[wolfram]

Hi Jordan, I know im a bit behind in doing so, but I am happy to see that your health is much improved. I also want to say that Awgy did a great job while you were out.

 

[DTR]

Hi Jordan, I know im a bit behind in doing so, but I am happy to see that your health is much improved. I also want to say that Awgy did a great job while you were out.

Thanks buddy. Glad to be back up and running.

 

[Dundee]

Sweet! Nice to have a good local supplier, especially for components. Not easy to find 520nm copper-encased laser modules above 200mw. Any chance you'll carry any nice 16340 and/or 18650 Hosts for your modules?

 

[DTR]

Sweet! Nice to have a good local supplier, especially for components. Not easy to find 520nm copper-encased laser modules above 200mw. Any chance you'll carry any nice 16340 and/or 18650 Hosts for your modules?

Thanks we take pride in our copper modules being a supplier of real C1100 99.9% Pure copper modules that are professionally machined. On hosts unfortunately to operate within the current regulations I can't offer hosts on the site but there are many good sources for hosts out there that fit both the 12mm and 20mm modules.

 

[Deleted member 46822]

Sweet! Nice to have a good local supplier, especially for components. Not easy to find 520nm copper-encased laser modules above 200mw. Any chance you'll carry any nice 16340 and/or 18650 Hosts for your modules?

Look into "Survival Lasers"
They have host kits that ican nclude heat sinks. They use to have a International but might have incorperated it to the whole sight.
They still might have a LPF10% discount.

 

[Dundee]

Thanks Bro-migo! A nice site for Hosts and parts.

 

[Marco Polo]

Are any of the singlemode 638 or thereabouts diodes available, or an ETA on when they might be?

 

[DTR]

Are any of the singlemode 638 or thereabouts diodes available, or an ETA on when they might be?

Let me check. I might have a few still. I will let you know in a few hours when I get back.

 

[DTR]

Are any of the singlemode 638 or thereabouts diodes available, or an ETA on when they might be?

Checked and I actually do have 5 of the sharp 185mW 638nm diodes.

 

[Marco Polo]

I actually just placed an order for the Sharp 488nm

Please set to rated current only, no need for overdrive.

I really appreciate it!

 

[DTR]

No problem it’s on the way. These are paired with the Lazeerer nano buck boost driver. The ones I have that are the lowest current and use with this diode are fixed 175mA.