gksudo
0
- Joined
- Sep 2, 2011
- Messages
- 54
- Points
- 0
Hello all. I've searched many results and threads on laser driver test loads, but can't find what I need to know.
I will be using one of DTR's 1W 445nm diodes in a laser project. I've built an LM317 driver.
The circuits I've seen vary from the senkat red diodes, to blu-rays. Since there's apparently a variation in the circuits and I couldn't find a 1W 445nm driver test load, I wanted to be absolutely 100% sure I will be measuring a driver that is correct.
If you could post at least the parts and possibly a thread with the EXACT type of circuit to use, that'd be helpful.
I will be using one of DTR's 1W 445nm diodes in a laser project. I've built an LM317 driver.
The circuits I've seen vary from the senkat red diodes, to blu-rays. Since there's apparently a variation in the circuits and I couldn't find a 1W 445nm driver test load, I wanted to be absolutely 100% sure I will be measuring a driver that is correct.
If you could post at least the parts and possibly a thread with the EXACT type of circuit to use, that'd be helpful.