Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

Driver for PLTB450B

M

Machro

0
Joined
Nov 14, 2010
Messages
208
Points
18
Yo guys,

Havent been active in lasers for a few years now and would like to get started again.

Im looking for a driver to output ~1A from a single cell.

Preferably a cheap one with a spring attached to it already :p

So i came across these two:

445 450nm 0 3 1W Laser Diode Drive | eBay

450nm 445nm 473nm Blue Laser Diode Driver 1W 1 4W 3 7 4 2VDC in Power Supply | eBay

Though Im not sure how much they really put out, especially the first one since it doesnt have a pot.

Which one would you prefer and do you have any experience with them ?

Greets,
Machro
 





Unfortunately the concept of "cheap" and "reliable laser drivers" don't usually go together...

If the listings are correct then both drivers are boost drivers and should work fine with a single cell setup. Although it's your risk, personally I would use a quality boost driver that has been proven reliable. You're going to spend 50 bucks on the diode, why not spend an extra $15 for a good driver?
 
Hi that's right you get what you pay for . Will is correct 100% lazeerer xdrives are the ultimate drivers out there. PM him and he'll do you no wrong he's one of the best. I never went wrong with his drives. He will make what you need, don't put you diodes in danger.
Trust me you'll be satisfied.
Good luck lase on.. :-))
 
Is there such a big difference between Boost LED an LD drivers when they both output a decent current and boost voltage ?
Or are you just talking about quality issues ?
 
Led drivers tend to spike when first turned on and can have a lot of current ripples. Leds can take this abuse. Lds cant. Good ld drivers have "soft start".
 
Last edited:
I asked the seller, he said the driver is not constant current.

However guys, thanks for the help.
 
Hi M,
Just like DTR said go to flamingpyro or lazereer these guys are the best and will give you what you need without any guess work. You have your diode get the correct drive for the LD. All thes guys here are awesome vendors and been around doing this a long time.why go back and ask the vendor your answers are here at you finger tips. Order that drive bro don't stop now.
Good luck enjoy this great hobby but be safe get some correct glasses :-))
 
I still have an old jib linedrive set at ~1A laying around here, though it takes to cells..
 
You must log in or register to reply here.


Back
Top