Can someone "Sell" me a driver..

[Misanthrop]

Umm I'm looking to power a 2W 445, Send me some quotes!

 

[jimdt7]

I dont sell any drivers, but i recommend 2 flexdrives v5 sinked together and set at 900mA.
If you have a big heatsink, and a g2 lens you will easilly hit 2W.

Jim

 

[eytyxhs]

What Diode you have? A140 or M140?

Also, one cell driver or 2Cell? What host you'll use?

 

[Blord]

I have a Jibs driver set at 1.8Amp. I was going to use it with my 445nm diode but I have change my mind and go for more conservative 1.5A. The driver is never been used.

And better post it in Buy/Sell section.

 

[Misanthrop]

What Diode you have? A140 or M140?

Also, one cell driver or 2Cell? What host you'll use?

Hopefully powered by 2 18650's (3.7, 3000 MaH)

I will get one of DTR's M140's

The heatsink is copper.

I have a Jibs driver set at 1.8Amp. I was going to use it with my 445nm diode but I have change my mind and go for more conservative 1.5A. The driver is never been used.

And better post it in Buy/Sell section.

Indeed, although it was slightly relevant to the section

Also, how much, PM me.

 

[eytyxhs]

http://laserpointerforums.com/f39/fs-mohgasm-linear-drivers-68378.html

If you buy the DTR's diode and the 1.8A driver from moh, you"ll get 2W with 445nm lens & 2.3-2.4W with G1 lens

 

[LaZeRz]

^come on man... Not all diodes are that efficient.

 

[offroadfreak8582]

my m-140 from flaminpyro: 700mA in 772mW output @ 5.34 volt

Wanna hook it up in a C6 with an 1.5A driver.

greetings,,