Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Can I join the club yet?

Joined
Mar 8, 2008
Messages
2,669
Points
48
...Or does this thing actually have to light up first? ;D

As you can see, I got my second 6x drive today. The first one is resting happily in my computer, being used for its intended purpose. This one, on the other hand, is going to be ripped apart tonight. Here are some pictures, I'll be adding more as I tear it apart. (starting in about 10 minutes)

DSC00689.jpg


DSC00690.jpg


DSC00691.jpg


DSC00692.jpg


DSC00693.jpg


DSC00694.jpg


DSC00696.jpg


I was hoping I could have it all finished by tonight, Unfortunately my new DMM isn't here yet. I'm also waiting on the driver. So if all goes well I should have some beautiful 100mW 405nm pictures up by friday.

Wish me luck 8-)
 





I finished extracting the diode about an hour ago, I didn't get the heat sink off yet, but I figure its a good place to stop until tomorrow. More pictures to follow, I just gotta upload them all.
 
So i pulled the diode out of the heat sink and everything is looking good, except one small thing. When I look at the window of the 405nm diode, it looks almost like its loose. Its not broken or scratched or anything, it just looks like its not glued in place. When I shake the diode I can hear a tiny tick (shifting window). It doesn't look like it will cause any problems, as it cant shift enough to obscure the light path or anything like that. I guess we'll just see what happens.

Other than that everything went smooth!
 
GooeyGus said:
So i pulled the diode out of the heat sink and everything is looking good, except one small thing. When I look at the window of the 405nm diode, it looks almost like its loose. Its not broken or scratched or anything, it just looks like its not glued in place. When I shake the diode I can hear a tiny tick (shifting window). It doesn't look like it will cause any problems, as it cant shift enough to obscure the light path or anything like that. I guess we'll just see what happens.

Other than that everything went smooth!

Nerve racking isn't it? Different than working with a $30 dollar drive. It wasn't till my 3rd 'high dollar' harvest that I started to relax.

Hope that window is alright. Hemlock Mike mentioned that he had problems with a window on one of his. Was it already loose? Or, do you think that it got loose during the extraction?
Jay
 
jayrob said:
[quote author=GooeyGus link=1209627905/0#4 date=1209641856]So i pulled the diode out of the heat sink and everything is looking good, except one small thing. When I look at the window of the 405nm diode, it looks almost like its loose. Its not broken or scratched or anything, it just looks like its not glued in place. When I shake the diode I can hear a tiny tick (shifting window). It doesn't look like it will cause any problems, as it cant shift enough to obscure the light path or anything like that. I guess we'll just see what happens.

Other than that everything went smooth!

Nerve racking isn't it? Different than working with a $30 dollar drive. It wasn't till my 3rd 'high dollar' harvest that I started to relax.

Hope that window is alright. Hemlock Mike mentioned that he had problems with a window on one of his. Was it already loose? Or, do you think that it got loose during the extraction?
Jay
[/quote]

I really cant tell if I knocked it loose or what. If i did, I have no idea when or how. Hopefully tonight everything will power up. As we speak I'm waiting for the mailman to bring me the rest of my goodies.
 
As I promised, more pictures!!

Complete sled assembly:
DSC00697.jpg


DSC00698.jpg


Look at all the cubes!
DSC00699.jpg


One diode down, two to go:
DSC00700.jpg


Success!!! We have a 6x diode!
DSC00701.jpg


Better Give it a safe home...
DSC00702.jpg


The other two. Does anyone know which is which, and what they're rated at?
DSC00703.jpg


Reminder to myself, so I dont throw it away on accident
DSC00704.jpg


Aftermath:
DSC00705.jpg


Cubes from the sled... tons of little optics!
DSC00706.jpg
 
Gus --
I knocked my window loose on the first one :( I think a portion of the glue edge got in front of the beam and I smoked that LD :'( I warned people to be careful with the front ends on these.
I sent mine to DrLava for microscope analysis.
Good Luck

Mike
 
Well I'll just hope for the best, if anything I have a backup drive... lol
 
Update: Got the diode lasing at ~70mA. Wow this thing is BRIGHT!! more updates and pictures tonight.
 
Awesome Gus
lol im really jealous ;)

yea thanks for the pics, there are allot of optics in those!
 
lol at the pics.

About at the center there is some scaring on all the pics. Been shooting lasers at your camera haven't you ;)
 
Murudai said:
lol at the pics.

About at the center there is some scaring on all the pics. Been shooting lasers at your camera haven't you ;)


;D Yup... its my cell phone camera. I tried to get some cool pictures with my alpha, now I have some spots
 


Back
Top