Burning Blu-ray Laser Diode in Aixiz Module $15

[styropyro]

sold.

 

[iewed]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

How did you test it without it's pins?

 

[styropyro]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

How did you test it without it's pins?

I held the negative wire of my driver up to the casing and I stuck the positive wire into where the positive pin is suppose to go. Don't worry, there was no capacitor in the driver I used

 

[iewed]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

How come you don't just solder those wires to the housing, then sell it for more?

 

[JLSE]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

:-X

 

[MarioMaster]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

"I have tried so many things to try to get a new pin soldered on, but I just can't do it."

might have something to do with it :

 

[sk8er4514]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

im tempted to buy this but i dont think my soldering skills could do a new pin yet. my coworker helped me with a similar problem with the pins broke off and he used an exacto knife and dug a little bit in there then dabbed some solder on a wire and stuck it in, then once on he used epoxy to create a base all around the pins and have the wires coming out as pins. worked great after it dried over night.

might wanna try that

 

[styropyro]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

How come you don't just solder those wires to the housing, then sell it for more?

That will only work for the GND pin.'

 

[rog8811]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

I have managed to get mine to work after breaking all the pins off, give it another go following these instructions......(post 4 on this thread)....
http://www.laserpointerforums.com/forums/YaBB.pl?num=1207684863/3#3
One slight difference is that with all the pins off you need to drill carefully in one of the reccesses at the edge of the LD flange and solder the negative capacitor leg into that hole that will keep it nice and rigid to help with the rest of the soldering.

Regards rog8811

* Edit....correct link now added

 

[Switch]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

Aw man, i was just about to claim it, but I'm not from the US. Would've sent you extra money for international shipping , but I'm not sure I could repair that, it looks in pretty bad shape. :'(

 

[usakicksass]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

I'll buy it!

 

[jamilm9]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

is it sold

 

[styropyro]

Re: Burning Blu-ray Laser Diode in Aixiz Module $1

is it sold

Most likely, if somehow the current sale goes through, there is another person that wants it.

 

[tony1]

Yes I have noted the date of the thread. Sorry I am still a new member