adam1
0
- Joined
- Jan 22, 2013
- Messages
- 55
- Points
- 8
Selling my first run of these CC-Boost drivers that rhd designed. 0 of these available. I can either set them to high or low range, giving a range of 500 - 2500mA output. Link to design thread
$8 + shipping + paypal fees
Next is 2x C6 JAD kit for an A/M140 diode. Contains a BenBoost driver at 1.267A wired up inside the pill and aluminium heatsink. All that you need to add is the diode in module with glass lens from DTR and then you have a 1W+ 445nm burning laser for under $100.
$20 + shipping + paypal fees
Third is 20x BenBoost mini drivers. These are ready to go and set at 1.267A (2x 30R resistors).
$7 + shipping + paypal fees
Finally is a 9mm 445nm Kryton Groove. The host is mirror finish with GITD strips and rings. Driver is CC-Boost set to 2.5A and has G9 lens in holder. Will put up photos once the new tailcap switch for it arrives. Don't have power reading as I do not yet have an Ophir but even an inefficient will be outputting >2.5W.
$200 + shipping + paypal fees
$8 + shipping + paypal fees
Next is 2x C6 JAD kit for an A/M140 diode. Contains a BenBoost driver at 1.267A wired up inside the pill and aluminium heatsink. All that you need to add is the diode in module with glass lens from DTR and then you have a 1W+ 445nm burning laser for under $100.
$20 + shipping + paypal fees
Third is 20x BenBoost mini drivers. These are ready to go and set at 1.267A (2x 30R resistors).
$7 + shipping + paypal fees
Finally is a 9mm 445nm Kryton Groove. The host is mirror finish with GITD strips and rings. Driver is CC-Boost set to 2.5A and has G9 lens in holder. Will put up photos once the new tailcap switch for it arrives. Don't have power reading as I do not yet have an Ophir but even an inefficient will be outputting >2.5W.
$200 + shipping + paypal fees
Last edited: