Beautiful blue Lifetime17 host for PLTB450b

[Xquantumtheory2019]

Your module has a driver so all you need is a 2 cell host ( 8.4v ) so you want to talk to Lifetime17 then when your host arrives all you have to do is connect two wires and turn an Allen wrench. Make sure you have correct laser safety glasses that attenuate the wavelength you are working with, any laser over 5mw can damage your vision for life so exercise proper safety.

Lifetime17 ( Rich ) makes nice hosts at a good price ready for your module, just let him know what you want. Click > and use the ( Start Conversation ) tab >>>>>> https://laserpointerforums.com/members/lifetime17.45683/


Also here's his sales thread >>>>>>> https://laserpointerforums.com/thre...at-sinks-focus-adapters-lasers.100082/page-95

Thank you so much for the reply. I just joined the forum today and am still learning the layout and the proper places to post my questions. Also thank you for answering even tho I posted in the wrong section

 

[LaserRanger]

Thank you so much for the reply. I just joined the forum today and am still learning the layout and the proper places to post my questions. Also thank you for answering even tho I posted in the wrong section

Welcome to LPF buddy.
If a host is all you need then Rich is the man you are looking for!
I put together the diode and module then added a driver and all I had to do then was solder the driver to the wire leads and place it in the host and tighten the set screw and done. He makes really great hosts and can send you silicone wire and heatshrink pieces for when you solder the diode