Argentum LPM Enclosure

[Lifetime17]

Hi LPF,
Here is an enclosure for the Argetum LPM, it fits the current model . I think there were 3 models made mine is the second one . If you have questions about fitting just send him a message. It comes with the plug for the 9v battery and has the cutouts for the Data logging cable and Thermopile cable. Installing switch 2 screws . He has a sales page on eBay . I had this LPM sitting around since I bought it from a member now it has a home.
Rich

 

[jevs]

Thanks for posting pics of your install! Looks good. For anyone looking, I sent some prototype adapters to Lifetime17 for the short switches on the red board. For now the case fits the white board with 13mm tall switches. Lifetime17 added some spacers to work with his red board for now. It has 4.3mm tall switches.
If the adapter works out, I will change the add to include the red board with short switches.
I did not know of a 3rd board type. Do you know what is different with that one?

 

[paul1598419]

Did you only get the 20 watt sensor with yours, Rich? It would seem that more people bought those than the 6+ watt one. I bit the bullet and got both. Thanks for your update.

 

[jevs]

I designed a switch adapter for the older short switch boards. I sent one to Lifetime17 for his board and to test. Thanks for testing it!

I have now added the adapter to the case kits for sale, so if you have the red board with the short switch the case assembly should work for you. No adapter is needed for the current white colored long switch boards.

I also updated the work instructions

Sorry I still cannot post a link (not enough posts). So add a www. to this:
dropbox.com/s/pcmg2hifhovvoim/Case%20Assembly%20Instructions%20for%20Hyperion%20Laser%20Power%20Meter%20.pdf?dl=0

(picture is edited with paint to show how it goes on because I do not have a red board)