Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Argentum LPM Enclosure

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
5,999
Points
113
Hi LPF,
Here is an enclosure for the Argetum LPM, it fits the current model . I think there were 3 models made mine is the second one . If you have questions about fitting just send him a message. It comes with the plug for the 9v battery and has the cutouts for the Data logging cable and Thermopile cable. Installing switch 2 screws . He has a sales page on eBay . I had this LPM sitting around since I bought it from a member now it has a home.
Rich:)C2A97D9D-3FD1-4A63-8D0D-DB1D892BF65A.jpegF5146224-0787-4755-B465-0D04B087147E.jpegA2223782-54A2-42A3-A5AE-FEAC8F57AC11.jpegD4D05B69-8839-4804-908C-F45E19380583.jpeg77BACD6E-B0A5-489F-9169-1F388965AEB5.jpeg3FF7DAAD-5F06-40AB-B027-39AC2877C11B.jpeg
 



jevs

New member
Joined
Oct 22, 2019
Messages
9
Points
3
Thanks for posting pics of your install! Looks good. For anyone looking, I sent some prototype adapters to Lifetime17 for the short switches on the red board. For now the case fits the white board with 13mm tall switches. Lifetime17 added some spacers to work with his red board for now. It has 4.3mm tall switches.
If the adapter works out, I will change the add to include the red board with short switches.
I did not know of a 3rd board type. Do you know what is different with that one?
 

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
17,449
Points
113
Did you only get the 20 watt sensor with yours, Rich? It would seem that more people bought those than the 6+ watt one. I bit the bullet and got both. Thanks for your update.
 

jevs

New member
Joined
Oct 22, 2019
Messages
9
Points
3
I designed a switch adapter for the older short switch boards. I sent one to Lifetime17 for his board and to test. Thanks for testing it!

I have now added the adapter to the case kits for sale, so if you have the red board with the short switch the case assembly should work for you. No adapter is needed for the current white colored long switch boards.

I also updated the work instructions


Sorry I still cannot post a link (not enough posts). So add a www. to this:
dropbox.com/s/pcmg2hifhovvoim/Case%20Assembly%20Instructions%20for%20Hyperion%20Laser%20Power%20Meter%20.pdf?dl=0

(picture is edited with paint to show how it goes on because I do not have a red board)
 

Attachments





Top