808nm pig tail fiber lasers

[zxn474l]

If I purchased a 40 watt fiber coupled laser with a collimated lens at the end of it could it be converted to 532nm green just by placing "crystals" in front of the collimated beam and adjusting the lens to get a different green focal point beam? Sounds simply but would it work? This would be a simple cheap high output green 532nm laser. Please respond if you can help or have a working knowledge of this type of arrangement that I want to try to accomplish!

 

[Kenom]

sure tis feasible

 

[Deleted member 49011]

It is possible i think but you would need the KTP and the other crystal the name escapes me , and the crystals woud need to be able to handle the power , you will mess the crystals up if they are to small but it should work

good luck with it

 

[Gryphon]

With that much pump power its best you have some good quality and decent sized crystals, not to mention adequate heatsinking as pumping that much light will produce a good amount of heat, but none-the-less, it sounds feasible.

 

[Deleted member 13229]

Yes it would work, this is how high powered DPSS laser systems work. But let me tell you, it's not just as easy and putting the crystals in front of the IR beam...

 

[Laser_Ben]

Please read the whole thread linked to in my signature...