Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

4.2W 465nm NUBM07E on Cypreus II XL 24k Gold Plated !






Joined
Apr 2, 2009
Messages
10,662
Points
113
BUMPING FOR RICHARD


Hello everyone!
So I decided to cannibalize my "old" 462 nm 1.7W and recovery the awesome host to use with this stunning diode.
I never imagine to have a so beautiful color with a so powerful output in a so fantastic host :bowdown:
Here is the full story:

Assembling the switch:

avIsTS.jpg


CqtUtN.jpg


yF49xQ.jpg


Soldering a neodimium gold plated disc on the top on the spring to maximize the battery contact:

fJkUq7.jpg


Inserting a piece of acetate foil into the host barrel to avoid battery shakes and rattles:

UmEZQd.jpg


All the parts ready to be soldered and assembled:

79s3Fa.jpg


Placing the driver into the heatsink and soldering the washers:

U8D3b7.jpg


Assembling the heatsink:

Q47twV.jpg


Connecting, soldering and thermal gluing the driver to the heatsink:

7srueZ.jpg


The host fully assembled:

r72iDl.jpg


The host clamped on Manfrotto tripod:

xhIVyE.jpg


The diode performance on three elements glass lenses : :)drool: )

LDuVKy.jpg


The awesome beamshot:

YWFLQ8.jpg


Conclusions:
the output power with three elements glass lenses is impressive, far beyond my best expectations!
I used LG INR 18650 3000 mAh 20A high draining cells, that is a must for such kinds of current hungry diodes
(the driver is set at 4.5A).
The divergence in the slow axis is a bit more of the NDB7675 1.4W 462nm diode.
This diode generate really a lot of heat! Also the Cypreus II XL has difficult to manage such power: at 26 °C room temperature the heatsink become warm (near hot) after 90 seconds, so I suppose that 60 seconds runtime should be a good time for such host in summer time.
During winter season surely the time can be almost doubled.
As the graph shows, there is an noticeable loss of power as the heatsink warm up.
Despite the not-ideal working conditions (high temperature, pushed near the knee and without protective can), this diode seems to be very strong and show a really beautiful light blue beam.
This is surely the diode of the year.
Thanks one more time to DTR and Sinner!

Richard.


This one might be the best one- and for sure A 'ONE-OF A KIND'
SOMEBODY BUY IT BEFORE I DO--pLeeease
 
Last edited:

Coonie

0
Joined
Jan 12, 2018
Messages
303
Points
43
Just bump his for sale thread and not needlessly necro this one....
 




Top