Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

$3.74 Laser Tri-Pod Review






Back on=topic

I got one of the cheaper and was not too happy w/ its 'strength' of the legs. The one I have had a poor way of hinging the three legs with a short 'pin' to keep the leg from just falling out.

I highly suggest treating them very gently as the plastic part that 'hinges' the 3 legs is not very strong.

I pressed downward with a laser in the clip ...just to spread the legs and one of them broke free. Tried to JB Weld it back but that did not go well.
The version from Sanwu looks to have metal where the cheaper is plastic.

Having several of both should solve that.... use the cheaper for small lasers & be gentle.

+rep for great thread.
 
Thanks for the reps haksaw1. :)

Yes they are pretty cheap, but for price they seem (to me) to be well worth the 3.74 asking price. Hope they stay together and work for your application.

If something breaks that just give you the excuse to experiment! :crackup: :D
 
Last edited:
Hi,
I had some of those smaller tripods , now i use these flexible legs and has a 1/4 -20 threaded post to accept some nice clamps.

Rich:)
 

Attachments

  • fullsizeoutput_568.jpeg
    fullsizeoutput_568.jpeg
    130.4 KB · Views: 12
  • fullsizeoutput_567.jpeg
    fullsizeoutput_567.jpeg
    128.3 KB · Views: 13
geesh Rich--that's some fine-ass laser p 0 rn there!!
 
Last edited:
Lifetime17 said:
Hi,
I had some of those smaller tripods , now i use these flexible legs and has a 1/4 -20 threaded post to accept some nice clamps.

Rich:)
Click to expand...

Those are very similar to the SmallRig clamps. I have several and they are great. I've seen that tripod, but spend a little more for mine. I bought one once with plastic parts on it and.......never again.
 
Hi Hak,
Thanks those are some hosts i made this week and are up for sale .Working on a 2x26650 AL/CU side switch Enjoy buddy
@ Paul,
i been using these tripods for a while and they are very durable, The small tripod with the spring loaded clamp seems to fall over if not balanced right.
@ BT,
I bought quite a few of them and when opened up full you can get a MagLight battery tube to fit in the clamp.

Rich:)
 
Lifetime17 said:
Hi,
I had some of those smaller tripods , now i use these flexible legs and has a 1/4 -20 threaded post to accept some nice clamps.

Rich:)
Click to expand...

That is a nice looking tripod you got there Rich. Looks real sturdy also. It's looks just like the one you gave me, only it has smaller legs. Kinda like how the shorter leg looks.

I needed to buy a bunch of tripods and wanted them all to match (or as close as I could get) Had bought 15 off Sanwu before when they were 10.00 a piece plus shipping. They've since raised the price to 15.00 each. Didn't want to spend another couple hundred on 10 more. So I opted for the cheaper version. But there not nearly as study as the one you gave me. But they seem to work just fine in my application. And thanks again for the freebie, it's the tripods I use for my camera when I'm out on the road, because it's so secure.

Those are some might fine looking hosts in you signature! :)
 
Last edited:
You must log in or register to reply here.


Back
Top