Meatball
0
- Joined
- Feb 1, 2008
- Messages
- 2,894
- Points
- 0
Shipping within the US or CA only. All items will be individually packed and shipped with the service chosen by the buyer. USPS and UPS services are available.
For Sale:
542.7nm HeNe tube with 12VDC PSU included. Ballast is built into the enclosed tube. The tube has an aperture shutter and meters in at 1mw. The beam is visible in a dark room. Two tube "feet" are included.
$90 + SH
One Yobresal - made 445nm laser in a pocket mini host with a wrist strap. The A140 shines through an aixis 3 element coated lens. These were made for ~500mw operation. This laser uses a single CR123 for operation. Included is a GITD lens cap.
$80 + SH
632.8nm multimode HeNe tube with 120VAC PSU included. Ballast resistor is installed. This powerful tube has ~2 Hours of run time on it. New, these tubes put out 14mws+.
$60 + SH SOLD
Laser Tube Mount by Edmunds Scientific. Made of a heavy, single piece of metal. One Plastic "foot" is missing. This mount can hold and aim either of the HeNe tubes above, or a tube slightly smaller than either. Diameter is ~3 inches.
$20 + SH SOLD
405nm Micro Labby laser. Metered in at 110mw+ by Rob. This unit is... tiny. It is a custom build of mine. It uses a PHR-803t diode through an aixis acrylic lens. It is driven by a 120mA LM317. The laser is heatsinked by 2 custom heatsinks. One interior and one exterior. The interior heatsink can be seen here in this thread: http://laserpointerforums.com/f51/tutorial-micro-lab-laser-47839.html
This host is very unique and is ready to accept any other aixis mounted laser module, with any driver. The current linear driver is powered by an external 12V SMPS (included). The unit is switched with a keyswitch in the rear. Two keys will be included.
$50 + SH SOLD
One 650-G1 single element AR coated Lens mounted by Jayrob himself. This lens is the ultimate solution for power from your red diodes. It is a short focal length, and allows the most possible light through for your 630-750nm builds. The nut is threaded for the aixis module and has teflon in the threads for smooth action.
$40 + SH SOLD
One 12VDC HeNe PSU. Appears to be brand new. This PSU works with either of the HeNe's above. Alden connector output.
$25 + SH SOLD
Just PM me or Post here for inquiry or if you have questions, or want to make a reasonable offer.
-Yours Truly
Meatball
For Sale:
542.7nm HeNe tube with 12VDC PSU included. Ballast is built into the enclosed tube. The tube has an aperture shutter and meters in at 1mw. The beam is visible in a dark room. Two tube "feet" are included.
$90 + SH
One Yobresal - made 445nm laser in a pocket mini host with a wrist strap. The A140 shines through an aixis 3 element coated lens. These were made for ~500mw operation. This laser uses a single CR123 for operation. Included is a GITD lens cap.
$80 + SH
632.8nm multimode HeNe tube with 120VAC PSU included. Ballast resistor is installed. This powerful tube has ~2 Hours of run time on it. New, these tubes put out 14mws+.
$60 + SH SOLD
Laser Tube Mount by Edmunds Scientific. Made of a heavy, single piece of metal. One Plastic "foot" is missing. This mount can hold and aim either of the HeNe tubes above, or a tube slightly smaller than either. Diameter is ~3 inches.
$20 + SH SOLD
405nm Micro Labby laser. Metered in at 110mw+ by Rob. This unit is... tiny. It is a custom build of mine. It uses a PHR-803t diode through an aixis acrylic lens. It is driven by a 120mA LM317. The laser is heatsinked by 2 custom heatsinks. One interior and one exterior. The interior heatsink can be seen here in this thread: http://laserpointerforums.com/f51/tutorial-micro-lab-laser-47839.html
This host is very unique and is ready to accept any other aixis mounted laser module, with any driver. The current linear driver is powered by an external 12V SMPS (included). The unit is switched with a keyswitch in the rear. Two keys will be included.
$50 + SH SOLD
One 650-G1 single element AR coated Lens mounted by Jayrob himself. This lens is the ultimate solution for power from your red diodes. It is a short focal length, and allows the most possible light through for your 630-750nm builds. The nut is threaded for the aixis module and has teflon in the threads for smooth action.
$40 + SH SOLD
One 12VDC HeNe PSU. Appears to be brand new. This PSU works with either of the HeNe's above. Alden connector output.
$25 + SH SOLD
Just PM me or Post here for inquiry or if you have questions, or want to make a reasonable offer.
-Yours Truly
Meatball
Last edited:
me so greedy me want moar lazorz :crackup:
