Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

12X S06J Blu-ray Heat

RyanElectro

RyanElectro

0
Joined
Feb 18, 2012
Messages
796
Points
28
Hey guys,

I was wondering with the 12X S06J Blu-ray diodes, do they heat up as much as an A/M140 at the same current?

ie.
Driver @ 500mA w/ M140
give off same heat as?
Driver @ 500mA w/ S06J

Or, does the S06J give off much more heat at 500mA because it's max current is only around 500mA while the M140's max current is around 1.8A?

I ask because I want to build a CR2 Keychain host with an S06J diode at 537mA (ben boost) and was wondering if there will be adequate heatsinking.

Any thoughts?
Ryan
 





The formula for heat production is:
Voltage in x Current in - Light power out.

So, a 12x @ 500mA you're looking at around:
(6.2V x 0.5A) - 0.7W out = 2.4W Heat

The Vf of a M140 is less so the heat is less for an M140.
 
Last edited:
Oh that's how you calculate heat production. Thanks!

*edit*: oh btw where did you find that diode voltage data? I can't find it in the diode compilation thread.
 
Last edited:
The VF actually increases with the current you feed the diode. My 4.5V figure is kind of a central mark along the plot for a PHR diode. Going over slightly never hurts anything in this application, so it is safe to use for a 445nm diode as well, but those vary even more due to the larger current range. All I can say for sure is that there IS some data SOMEWHERE that suggests the 12x diodes cana ctually have Vf's of >4.7V at high enough currents. Most of us don't run these diodes past 0.5A though.
 
Last edited:
From DTR Ebay page.

700mW 12X 405nm S06J Blu-Ray Laser Diode | eBay

With G-2 lens


Vf------mA----mW
4.01----50-----38
4.35----75-----81
4.62----100---121
4.88----125---166
5.08----150---209
5.27----175---255
5.41----200---296
5.53----225---337
5.64----250---381
5.73----275---418
5.81----300---462
5.88----325---503
5.93----350---537
5.99----375---579
6.04----400---617
6.08----425---656
6.11----450---692
6.15----475---728
6.18----500---767
 
Man, I didn't think the Vf shot up so much! Holy cow, I was way off.

I see why now... 4.5V is only valid for the PHR series... no wonder. I didn't think the Vf changed so much between them.

As per the OP; formula still stands =). But this of course means a 12x will run hotter per mA than a M140.

Btw, ty Piferal!
 
Last edited:
Yes, the 405nm laser diodes usually have an Operating voltage "recommended by the manufacturer" rather high,
and we know that we always like push this babys near the limit :eg: which means that the voltages can be overcome this, naturally already high.

To give just 2 examples, the sony 405nm 200mW has an operating voltage of 5.0V

And the laser diode from Opnext of 405nm and 500mW, has an operating voltage of 5.5V :eg:

And these are just normal operating voltages, and we know that we like to push them, then you can reach voltages of 6V quietly.
 
Last edited:
piferal said:
And the laser diode from Opnext of 405nm and 500mW, has an operating voltage of 5.5V :eg:
Click to expand...

Good find, I didn't even know that Opnext had a 405.

I wonder if anyone on the forum has tried to source one? (Beyond paying whatever ridiculous price I'm sure Thorlabs marks it up to)
 
rhd said:
Good find, I didn't even know that Opnext had a 405.

I wonder if anyone on the forum has tried to source one? (Beyond paying whatever ridiculous price I'm sure Thorlabs marks it up to)
Click to expand...

So funny, I just stumbled onto this one a few minutes ago and then did a search, this is the only thread it is in right now.

It is multimode, but it still would be nice if we could get some more power out of a 405nm for beams anyway.

It is mentioned here as well...

Opnext Laser Diodes: Violet, Blue, Red, and Infrared

Introducing our new 445nm 80mW single transverse mode blue laser diode, the HL45023TG is ideal as the blue light source for RGB laser pico projectors.

The 404nm, 500mW multi transverse mode violet laser diode, the HL40023MG is suitable for direct imaging for printed circuit boards and medical analysis equipment.


EDIT: I wonder if one of the Chinese partners might be willing to sell these diodes? I know a lot of the diode makers don't like for their diodes to fall into hobbyist hands, but the Chinese seem to have less concern for silly "rules?"

Details and ordering technical support contact OPNEXT agents:
Beijing the Vauthey Phoenix Electronic Technology Co., Ltd. 010-82675308 Yang Haiyan 13,552,581,955 yanghy@vertex-ic.com
Shenzhen the Vauthey Alex Electronic Technology Co., Ltd 0755-61392046 Young to far 18,665,360,171 victor@vertex-ic.com *

How to Buy

Opnext's Optodevices are sold through a world-wide network of distributors. For locations outside of Europe and North America, please contact info@opnext.com.

North America
WPG Americas United States 1-888-974-8881 WPG Americas - Home
Avnet United States 1-800-332-8638 Avnet Electronics Marketing - Electronic Components Distributor Services, Datasheet PDF Download, Part Number Search 4.5 Million + Components - Avnet Express
ProPhotonix Limited United States 1-800-472-4633 Prophotonix: OEM Laser Diodes Distributor and Manufacturer of Machine Vision Lighting Solutions and Laser Diode Modules

Europe
MSC Locations throughout Europe +49 (0) 711 783360 MSC Vertriebs GmbH Startseite
Arrow Europe Locations throughout Europe See website for details ArrowEurope - Home
Optomark Germany & UK +49 203 6 08 67 34 Home
ProPhotonix Limited UK & Germany +44 (0) 1279 717178 Prophotonix: OEM Laser Diodes Distributor and Manufacturer of Machine Vision Lighting Solutions and Laser Diode Modules
OEC UK +44 (0) 1279 210211 The Optoelectronics Co. Ltd: Supplier of Optowell VCSELs, Opnext Laser Diodes & Panasonic Lenses & Custom Laser Diode Modules

Africa
Hi-Q Electronics (Pty) Lt.d South Africa 27 11 894-8083 Hi-Q electronics - South African electronic components distributor

Asia
Litrax Technology Co. Ltd. Taiwan +886-4-25346560 Litrax - Fiber Optics / Industrial / Medical laser systems
Nextech India See website for details NEXTECH Electronics - Electronic Components I Network Tools I Renewable Energy I
Panoptics South Korea +82-502-702-9999 We offer Marketing/Outsourcing Services for you
Photonteck Company Ltd. Hong Kong +86-755-86170157
+86-755-86616298 ¸»Ì©¿Æ¼¼£¨Ïã¸Û£©ÓÐÏÞ¹«Ë¾
Vertex Beijing, China +86-10-82675308
+86-10-62630484 沃泰克斯电å*�技术有é™�å…¬å�¸
 
Last edited:
You must log in or register to reply here.


Back
Top