Search results

Hey guys, am after 0.0750 bitcoins. Would be paying through paypal GBP, if anyone would be willing to sell private message me with price :)

Hey guys, so today I have for sale a kryton groove 445nm laser with 9mm diode. Its a very sleek and beautiful host. I dont have a lpm but it should do over 1.5W fine. It feels very solid in your hands, and heat sinking is great as the whole host is the heatsink. Should allow for some nice duty...

Hello everyone. Today I have for sale a 500mw bluray laser in a C6 host. It is shipping from the UK, and isn't LPM'ed, but I am pretty sure its around the 500mw mark. The diode is from a BDR-206 12x, and its using a mohgasm driver. It will burn paper, and light matches, without the need to be...

Hey everyone. For sale is a 300mw red laser for sale. Its in a Aurora C6 host, with black anodized heatsink. It is currently in the US with jeffreythe00, whos is acting as a middle man. He has LPM'ed it, and its doing about 320mw with a normal aixiZ lens. Runs off 2x 16340 batteries (not...

Hello everyone. So today I made a bit of a discovery. I got some 3d glasses (the red blue type) and shone my 100mw green laser through it. When it went through the cyan one, it went straight through, no blocking there. Then when I put it through the red one, it blocked it completely! Only a...

Hi everyone. So in a couple weeks, I'm going to send a laser to US, and I'm a bit worried about customs seizing it. If I took the laser apart prior for shipping it, and sent it out in two packages, would that work? One package would include the host, and the second would include the pill...

Hello all. So I want to start a new project, a RGB laser, in a lab style host. I'm going to be using Dichros, and 50mw Green, a 40mw 445nm blue, and a 180mw red. Now, I see 2 major problems; One, is the different beam diameters. I'v never had a 445nm before, so I cant say how big it is, but a...

Hi guys. Recently I have got a urge to stock up on my green lasers, as I only currently have 1. I am looking for green laser pens, any type, normal black, silver/chrome, kaleidoscope pens, whatever, anything under 50mW and over 10mW will do just fine. PM me your offers or post them here...

Hi. Today I am selling my GhostDrive 2 set at 238mA because I have decided to do a different build, and I just don't need this anymore. Never used this inside a host, and I have also soldered on silicone wire (the best) to the battery inputs, I left the LD side without wires in case someone...

So today I got my new PHR-805 from odicforce in the post, and I got my 104ma ghostdrive2 (not sure, dont have a test load, but it should be 104ma) and soldered the 2 together, I shorted out the cap beforehand, and the pins were nice and long and I didnt have the soldering iron on it for too...

ok, so today I was going to try and build a bluray, I have all the parts needed, the heatsink, driver (ghostdrive2) and the SF-AW210 which i got from scpoeguy/glenn. i soldered everything up, and the setup was working, although the laser dot looked a bit wierd, but it worked never the less...

ok so I have about 3 18650's , 6 16340 and 2 10440 and recently I have found it really hard to charge them. they are all at about 3v now, and when I got them they used to charge in about half a hour to 4.2v. just to describe the problem, today i had my 10440 battery in the charger at 3:00pm...

hi, I need a replacement collimation lens (the small white round thing glued/attached to a green laser assembly) for my 100mw classic lazerer greenie. I have found it on odicforce lasers but they sell it with a brass module and another lens, totaling $7.99, but I dont really need the brass...

Hi. So I'v had a 100mw green classic for a while now, about 2-3months, and a few weeks back,the dot got really dirty, something on the lens, it had a awful lot of spatter around it. I couldnt figure out the problem, so I opened the top lens cap, revealing the assembly inside. There was a white...

Hi everyone, just wanted to share my recent LPC-826 build in a "pocket pal" look alike host. The host is anodized red, and looks really metallic and good. I also have a blue version of the host for a future bluray build, so they will be like twins. the laser will be available to buy as soon as...

Hi so a little while ago, i decided to take out the drive in my old laptop to see if i could find any diodes, i took it all apart, and i found a small brass heatsink, i didnt think much of it then, so i put it on top of my wardrobe now, about 2months later, i picked it up and saw it had 3 pins...

hi. I know this is probably in the wrong section, but anyways, I have a 100mw classic laser that I bought off lazerer a few months ago. for some weeks now, there is a slight problem. when I switch the laser on from a cold start, there is a lot of spatter around the dot, and it has wings and...

Hi everyone. So I was thinking about various things to build a laser into, and I had a great idea (I think) of building one into a zippo lighter/flip top lighter. I will use a bluray diode with a fixed focus so there is a focal point, where it will burn say cigerates etc. It will be hard...

hi everyone. just saw this:1200mW 532nm Green DPSS Laser + matched PSU. 1.2 Watt!! | eBay on ebay. it seems legit, and current bid is only £54 atm. i would bid if i had the money, but i thought one of you guys might be looking for something like this.

Hi. Im pretty much in the middle of my first ever laser build, and I've done the hard bit of soldering the diode to the driver and I've tested it and the laser works, just need to work on the host so i can put the assembly in the host. However, when i got the diode in the aixiz module from...