Search results

The Specs : Model Number: Megascan i50 Scan Angle: +/-70 Degrees Deflection angle: Scan speed: Input: Power: Mirror aperture: max. 70° optical up to 30,000pps with 5x10mm mirror Analog +/-5V +/- 24VDC to +/-30VDC @ 1.2A 3.5mm, optional 4.5mm Mirror size:5x11mm Mirror Type: Coated Aluminum...

The Specs : Specifications: Model SDL-532-XXXT Output Power @ 25 ℃ 100 mW Wavelength CW 532nm Operation Mode TEM00 Linewidth <0.1nm Linear Polarization >100:1 Beam Diameter at the aperture <2mm Beam Divergence (1/e2, Full Angle) <1.5mrad Power Stability after warm-up <1%, <3%, <5% (over 2/4/8...

Lasershowparts Scanpro 30 review Hardware used for this review : Dac : phoenix / laserworld dac Software : he_laserscan / Mamba 200 mw red module The Specs : Model Number: SCANPRO30 Scan Angle: +/- 20 Degrees Scan Speed: >30kpps Power Input 90-265VAC Signal Input: -5v to +5v...

Laserworld LW-50K Galvo set. Review Technical data: • Deflection angle: max. 60° optical • Scan speed: up to 45.000 pps with 5x11x0.6 mirrors. • Input: analog +/- 5V • LW-45K PSU: +/- 24V DC 1 Amp Whats included in the box : 2 x Scanners 2 x Replacement mirrors 2 x Driver board 1 x...

Laser Century 50-150 mw 532nm dpss The Specs : Model GL532T-050 Output Power 50mW Output Wavelength 532nm Spectral Linewidth 0.1nm Beam Mode TEM00 Operating Mode CW Beam Divergence, Full Angle 1.5 ± 0.2mrad Beam Diameter @ Aperture 1.0 ± 0.2mm Power Stability (T= 25[ch8451]) <±5% (over 2...

LaserWave 100 mW 660nm Analog module The Specs : Wavelength(nm) 660nm Output power 100mW Transveerse Mode TE00 Operating Mode CW Warm up time(minutes) <1 Beam divergence, full angle  (mrad) ~0.5(can adjust) Beam diameter at the aperture (mm) ~1mm (can adjust) Beam height from...

LanLing 200mW  650nm  Review Output Power: 200 mW Stability >90% Wavelength: 650 nm +/- 5nm Spot Mode TEM00 Operating Voltage 5v DC Operating Current 320 mA Storage Temp -40 degree to 80 degree Celsius Case Material Aluminium Beam Divergence < 1.2 mrad Beam Diameter at...

Output Power: 100 mW Stability >90% Wavelength: 650 nm +/- 5nm Spot Mode TEM00 Operating Voltage 0-5v DC Operating Current 25` 150 mA Storage Temp -40 degree to 80 degree Celsius Case Material Aluminium Beam Divergence < 3 mrad Beam Diameter at Aperture 4.5-5.0 mm Life...

AixiZ 50 mw 532 nm module The Specs Output Power: 50 mW Wavelength: 532 nm Spot Mode    TEM00 Operating Voltage 90 -230 volt ac Operating Current Diode current 350 mA Storage Temp -40 degree to 80 degree Celsius Case Material Aluminium Beam Divergence < 1.2 mrad Beam...

Hi all Just wanted to share my latest project with all of you  :) Originaly this laser was a 1 watt mixed laser   8-) The original diodes where 4x 635 nm 250 mw   Sadly when i got this one all the diodes where dead    :'( So at the moment im trying to give this baby new life The plan is to...

hey guys any of u got any faulty modules / pointers laying around. im interested in buying them from u . or im also able to repair them for u in most cases Anything is possible. Tec driver repair diode driver repair Diode laser replacement crystal replacement tec replacement Even galvo repair...

Re: Using power of 2 80mW just use a polarised combiner cube but u can only combine 2 diodes with those just get some open can diodes and combine to 600 mw of 655-660 nm 160 mw is not very interesting i can get double that from a singel open can diode i would sugest to use the glass aixiz...

Hi All After beeing away from the forum and moving to a new house. I finaly had some time to work on my tec cooled red laser. The diode is a open can type with a vey long laser cavity and was taken from a 16x dual layer dell oem drive (tsst) The housing i am using is from a old 100 mw greenie...

The Specs : Moncha USB device Input power: 5 V DC, 300 mA via USB Output: X, Y outputs: ±5 V / balanced, 16 bit resolution Color outputs: 0 - 5 V / unbalanced, 3 color channels Dimensions: 130 x 95 x 25 mm Weight: 300g Moncha is a usb dac made specificly for live shows. It has a max...

Hi All Just a review on the AixiZ Laser Aimer Chuck from AixiZ generously provided a sample for testing (Thanks Chuck) First impression is that is looks and feels very good It feels very solid and has a high quality feel to it Also it comes in a very nice box complete with all its parts...

This is a high quality laser module, it measures 153mw. As it is a modules it has no duty cycle, which is great for scanning and burning. The module comes with PSU, diode and has a TTL input on it. All you will need to do is add 110-240v to the PSU. The laser head has screw holes for mounting...

Hi All just a review on the Lanling-Tech 100 mw dpss module Looks like a winner !! especialy the beam quality Output Wavelength: 532nm CW Output Power: 100mW Beam Stability: 5% Beam Diameter: 2.0mm Beam Divergence: 1mrad Beam Quality (m 2 ): 1.2 Warm-up Time: 15 min Operating...

Hi All Im looking for dead lasers / parts any wil do name you price and send me a email or pm mvos2@chello.nl

Ive been complaining to newwish about the power ratings from there lasers Especialy the 50 mw modules i realy was not expecting them to be able to do 50 mw but mine did 5 mw when it arrived Stil 31 dollars for a 5 mw is not that bad. Turns out newwish are using 200 mw diodes in there 50 mw...

wanted dead or unused lasers or parts if u got anything please send me a email mvos2@chello.nl